How To Make Your Capture Hose More Rigid (Vaniman Mobile Suction Units)
How To Adjust Your Capture Hose Rigidity (for Mobile Units)
Are you having troubles with your mobile unit's capture hose?
Don't worry! There's a way to tighten it up so it stays in place.
Just give it a twist!
Place one hand on the hose base, and with another hand a few inches away, twist clockwise.
This will have the effect of hardening the hose so it doesn't droop, limp, or flop.
As you twist to tighten, you'll notice the diameter decreases.
Conversely, if you want MORE flexibility in your hose, you can twist to loosen. With hands in similar configuration, twist counter clockwise and the hose will bend much more easily. Here, you'll notice the diameter increases.
You can leave the hose attached to the base to twist, or you can remove it to twist, whichever is easiest for you.
It's important to twist evenly up and down the length of the hose. If you don't get the desired result, twist evenly along the length again.
But be careful -- if you loosen your hose TOO much, you could permanently damage it.
Remember the old saying: righty tighty, lefty loosey.
Give that hose a twist to adjust it to your specific needs!
More product info and news at our website: https://www.vaniman.com
Видео How To Make Your Capture Hose More Rigid (Vaniman Mobile Suction Units) канала Vaniman Manufacturing
Are you having troubles with your mobile unit's capture hose?
Don't worry! There's a way to tighten it up so it stays in place.
Just give it a twist!
Place one hand on the hose base, and with another hand a few inches away, twist clockwise.
This will have the effect of hardening the hose so it doesn't droop, limp, or flop.
As you twist to tighten, you'll notice the diameter decreases.
Conversely, if you want MORE flexibility in your hose, you can twist to loosen. With hands in similar configuration, twist counter clockwise and the hose will bend much more easily. Here, you'll notice the diameter increases.
You can leave the hose attached to the base to twist, or you can remove it to twist, whichever is easiest for you.
It's important to twist evenly up and down the length of the hose. If you don't get the desired result, twist evenly along the length again.
But be careful -- if you loosen your hose TOO much, you could permanently damage it.
Remember the old saying: righty tighty, lefty loosey.
Give that hose a twist to adjust it to your specific needs!
More product info and news at our website: https://www.vaniman.com
Видео How To Make Your Capture Hose More Rigid (Vaniman Mobile Suction Units) канала Vaniman Manufacturing
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
How to Replace the Brushes on a Blue Dot Motor (Vaniman Manufacturing Co.)How to Replace Your Sandblaster Cuffs - Vaniman Manufacturing Co.Nancy Dewhirst, RDH - Intro to OSAP Presentation Speakers - OSAP 2021 Virtual Conference2021 OSAP Virtual Conference - Clearing the Air (Highlights) - June 3, 2021How to Remove / Insert Tubing on a Vaniman SandblasterHow To Set Up and Maintain a Vaniman Mobile ProblastAdhesive Removal with the SandStorm Professional (Great for Orthodontists)Pure Breeze HEPA Air Purifier: Putting in the FiltersHow to Replace The Brushes On a Non-Blue Dot Motor (Vaniman Manufacturing Co.)Dr. Miller: (Upper Room) Germicidal Ultraviolet Light + ResourcesIntroducing the Pure Breeze FX HEPA Fume Extractor by VanimanQ&A: Does the 20 minute wait time still apply? - OSAP 2021 Virtual ConferenceCan You Capture Spray Paint with a Vaniman Pure Breeze FX HEPA Fume Extractor?How To Install the Pre-Filter Cyclone AccumulatorDr. Prather: Why We Think the Dominant Transmission Pathway of SARS-CoV-2 is the AirDr. Shelly Miller, PhD - Complete OSAP Presentation - OSAP 2021 Virtual ConferenceGlass Etching with the Vaniman Master Mobile ProblastDewhirst/Prather/Miller/Vaniman - Complete Q&A - OSAP 2021 Virtual ConferenceDr. Prather: 10 Scientific Reasons for How We Know SARS-CoV-2 is AirborneHow to Replace a Stone Vac II Motor (Vaniman Manufacturing Co.)