Spindle Turning 101: Reducing Vibration
Riding the tool's bevel of any tool is the key to reducing vibration and getting clean cuts when turning between centers. This applies to any tool: skew chisel, parting tool or gouge. The full 2.5 hour video is available by donation here: https://handtoolwoodworking.com/woodturning-for-chairmakers/
Видео Spindle Turning 101: Reducing Vibration канала Elia Bizzarri
Видео Spindle Turning 101: Reducing Vibration канала Elia Bizzarri
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Why Paint a Windsor Chair?
Rocker Blades: Quarter Sawn or Flat Sawn?
Recycle Old Shipping Boxes (How-To Turn Them Inside-Out)
Drawknife vs. Spokeshave
Wood Bending (Should You Over-Bend?)
Back Saw and Coping Saw Technique
Transferable Skills vs Dead End Skills
How to Avoid Spokeshave Chatter
Beauty vs The Sterility of Perfection
Mortising Chisel Modification
Skew Chisel 101 (Planing Cuts)
Wood Turning 101: Using a Homemade Tool Rest
Wood Turning 101: Stock Selection, Lathe Prep, and Safety
Carving a Wooden Bird: Opening Up the Feathers
Carving a Wooden Bird: Splitting the Feathers Out
Carving a Wooden Bird: Cutting the Groove for the Body
Making the Tapered Handle
Fine Tuning a Reamer
Making a Reamer: Boring for the Handle
Turing the Body of the Reamer