Power feed for the Z axis of the milling machine
Adding power feed on the Z axis of the mill was first in the ‘must do’ projects for quite some time now. My hand was getting tired cranking the milling head up and down every time I needed to change a tool.
I started looking at gear reduction motors; I wanted a compact motor with enough power and low rpm to handle the weight of the milling head... but anyway, you'll find out more as you watch the video.
I hope you enjoy the video
Dimitris (AKA Jimmy)
A big thank you to my friend Kostas Kalleris for his excellent ideas, work and of course his patience. Without his help it would have been impossible to complete this project.
Κωστή μου σε ευχαριστώ πολύ!
Видео Power feed for the Z axis of the milling machine канала JimmysCanal
I started looking at gear reduction motors; I wanted a compact motor with enough power and low rpm to handle the weight of the milling head... but anyway, you'll find out more as you watch the video.
I hope you enjoy the video
Dimitris (AKA Jimmy)
A big thank you to my friend Kostas Kalleris for his excellent ideas, work and of course his patience. Without his help it would have been impossible to complete this project.
Κωστή μου σε ευχαριστώ πολύ!
Видео Power feed for the Z axis of the milling machine канала JimmysCanal
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Making a Rosette Circle Cutter - YT Collaboration with Dadsinhisworkshop](https://i.ytimg.com/vi/w7HY6pdYMSw/default.jpg)
![Weiss WMD 30LV DRO Installation](https://i.ytimg.com/vi/SV1SYlcBLek/default.jpg)
![The Multifix Tool Post Adventure](https://i.ytimg.com/vi/JHrnIpRnsP4/default.jpg)
![Trip to UK](https://i.ytimg.com/vi/e4jaINmw8i8/default.jpg)
![Lathe carriage lock improvement](https://i.ytimg.com/vi/_tInlyecPzM/default.jpg)
![Milling vise stop](https://i.ytimg.com/vi/Er-7n1_Kffk/default.jpg)
![Weiss WM 250G Tailstock DRO](https://i.ytimg.com/vi/Y1GwObwDGOU/default.jpg)
![Making a jeweler’s saw](https://i.ytimg.com/vi/sf-oZEB8TQQ/default.jpg)
![Weiss WMD 30LV Bench Milling Machine](https://i.ytimg.com/vi/CJPbXs-I01U/default.jpg)
![Weiss WM 250G Bench Lathe](https://i.ytimg.com/vi/8NTO9jErQ6I/default.jpg)
![Renovating my workshop](https://i.ytimg.com/vi/cWYJr4S9Up0/default.jpg)
![Drill Press restoration and upgrade part 5 - Quantum B160 T Vario](https://i.ytimg.com/vi/5DpG5lKtQOU/default.jpg)
![Drill Press restoration and upgrade part 4 - Quantum B160 T Vario](https://i.ytimg.com/vi/b4P0d_1y01A/default.jpg)
![Drill Press restoration and upgrade part 3 - Quantum B160 T Vario](https://i.ytimg.com/vi/TFVWorrQzzw/default.jpg)
![Drill Press restoration and upgrade part 2 - Quantum B160 T Vario](https://i.ytimg.com/vi/5CiyUpaQcgo/default.jpg)
![Drill Press restoration and upgrade part 1 - Quantum B160 T Vario](https://i.ytimg.com/vi/5tKpYTrQULs/default.jpg)
![Τορνάκι Optimum D180x300 προς πώληση / Optimum D180x300 mini-lathe for sale](https://i.ytimg.com/vi/DlV4QUIfoKc/default.jpg)
![Damascus chasing hammer](https://i.ytimg.com/vi/Jsyl5k1ZVtI/default.jpg)
![25-50mm Digital Outside Micrometer Review from GearBest](https://i.ytimg.com/vi/hl7-q6t46bY/default.jpg)
![Cleaning tool for the lathe spindle bore](https://i.ytimg.com/vi/nCc7aNEsm2A/default.jpg)