Making Copper Soft Jaws from Scrap Copper Pipe for the CJ0618 Lathe - TipBlitz19
It's Tip Blitz 2019! A set of copper soft jaws for the lathe is very useful for holding parts without marking them. I had a bit of scrap pipe left over from when my house was renovated, which the plumbers had thrown away with the rubble left under the floor. It seemed about the right size, so I thought I'd try and make a set of soft jaws with it. This is the first video making something for the new CJ0618 Chinese Lathe I bought recently.
Tip Blitz 2019 is a collaboration between loads of machinists and makers on YouTube organise by Emma Ritson of Emmas Spareroom Machineshop. https://www.youtube.com/channel/UCGzK_LtfsUZ5KG1CczVg8AA
#tipblitz19 #tipsblitz19
The links below will financially support this channel if you use them to buy stuff:
Machines:
CJ0618 Benchtop Lathe (Sieg C2 copy) - https://ebay.to/2ki48jd
Materials:
Copper pipe, 15mm domestic plumbing - https://ebay.to/2kf1TNz
Music:
Easy Lemon by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/)
Source: https://incompetech.com/music/royalty-free/index.html?isrc=USUAN1200078
Artist: http://incompetech.com/
Видео Making Copper Soft Jaws from Scrap Copper Pipe for the CJ0618 Lathe - TipBlitz19 канала Adventures with a Very Small Lathe
Tip Blitz 2019 is a collaboration between loads of machinists and makers on YouTube organise by Emma Ritson of Emmas Spareroom Machineshop. https://www.youtube.com/channel/UCGzK_LtfsUZ5KG1CczVg8AA
#tipblitz19 #tipsblitz19
The links below will financially support this channel if you use them to buy stuff:
Machines:
CJ0618 Benchtop Lathe (Sieg C2 copy) - https://ebay.to/2ki48jd
Materials:
Copper pipe, 15mm domestic plumbing - https://ebay.to/2kf1TNz
Music:
Easy Lemon by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/)
Source: https://incompetech.com/music/royalty-free/index.html?isrc=USUAN1200078
Artist: http://incompetech.com/
Видео Making Copper Soft Jaws from Scrap Copper Pipe for the CJ0618 Lathe - TipBlitz19 канала Adventures with a Very Small Lathe
Показать
Комментарии отсутствуют
Информация о видео
14 сентября 2019 г. 4:00:06
00:04:48
Другие видео канала
Toolpost Spindle from Banggood for the CJ0618 Mini LatheFirst Chips on the Emco Unimat SL and Full ReassemblyLet's make a Trueing Tool with voiceover #shortsMaking a Trueing Tool for the Lathe #shortsDisassembling and Cleaning the Tailstock and Spindle of the Emco Unimat SL LatheCleaning the Disassembled Emco Unimat SL LatheMaking a 4-Jaw Chuck Backplate for the Proxxon PD 250/e Lathe #toolfest2021Making a Machinists Jack featuring Craig's WorkshopThe CJ0618 Lathe Saddle Part One, Measure the Problem with Gauge Blocks and Banggood Tool Review25000 Subscribers GiveawayMaking a Coat Hook for Coat Hanger 2020 on the Proxxon PD 250/e LatheReassembling the CJ0618 7x12 LatheDisassembling the CJ0618 7x12 Lathe, Cleaning, and TroubleshootingMaking a Custom Die on the Proxxon PD 250/e LatheMaking a Custom Tap on the Proxxon PD 250/e LatheQuick Change Tool Post Upgrade for the Proxxon PD 250/e LatheCutting an External Thread on the Proxxon PD 250/e LatheMaking a Vice Stop for a Toolmakers ViceHow I Tram my Vice on the Proxxon Mini MillGreat Dorset Steam Fair 2018