Making a Black Pipe Table Stand

In THIS video I am making an Industrial-style Black-Pipe Table to replace my wife’s aging crafting table. It was a quick project, and fairly easy. :-)
***PARTS LIST***
1x Table-Top material of your desired type and size
.....I used 1.5-inch thick Acacia Butcher Block counter-top, 24-inch deep x 63-inch long
32x screws of desired type and length (ensure screws are suitable length and not too long!)
4x 3-inch diameter self-adhesive felt pads to protect floor
1 can, Black, Hammered Finish, Rust-Oleum Spray Paint
(Black Steel Pipes - 3/4-inch diameter)
8x Flange
6x T fitting
4x connector
2x 2.5-inch nipple
4x 4-inch nipple
1x 6-inch nipple
2x 10-inch nipple
2x 12-inch nipple
4x 18-inch nipple
2x 24-inch nipple
Also needed are Acetone, rubber gloves, shop rags, thin wire brush, carpet knife (for cleaning the pipes)

Видео Making a Black Pipe Table Stand канала Todd McMahon