LATE-SIT with 60W input per channel
A SIT-3 clone with BUZ905D / THF51S
Gain stage is using transformer per SIT-3 spec and is driven with 6J1P Chinese preamp kit.
A single channel test with Android audio source.
My apology for fan noise.
Видео LATE-SIT with 60W input per channel канала Pascal Nguyen
Gain stage is using transformer per SIT-3 spec and is driven with 6J1P Chinese preamp kit.
A single channel test with Android audio source.
My apology for fan noise.
Видео LATE-SIT with 60W input per channel канала Pascal Nguyen
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
uSDX SDR 10W CB 27MHz IMD3
100g Load Gauge Sensor for CW Paddle
Constant Amplitude in SSB, PE1NNZ firmware, embedded in uSDX & (tr)uSDX
Zeus amplifier
Bi-Circleton
Envelope Restoration by Drain Modulation
Bi-Circleton left channel
Homemade PCB
15000 km QRP CQ Catch on uSDX with RF Preamp
Sota Mt Cloudmaker, first attempt
Near vertical incidence skywave
The Sound of 6J1
IV-8 Critical Alignment
Tactical end fed & inv. V for Bush Search & Rescue
14W (13.8V @ 1.1 A) Drain Modulation for class E QCX-SDR (uSDX) PA
THF51S & ALF08NP16V5 (36V/1.5A)
Official M2 schematic - diyAudio
THF-51S & ALF08NP16V5 ( 30V/1.8A)
uSDX SSB by Gate Modulation Test
Bi-Circleton, AD8307 Vu-Meter