Nordfab In-line Spark Trap

Installed in ducting as part of a dust collection system, the Nordfab In-line Spark Trap greatly reduces the possibility of fire in cyclones /collectors by decreasing the number of sparks which could reach the cyclone or collector through the ductwork.

The spark trap’s effectiveness is based on a simple principle disrupting the laminar airflow to cause sparks to cool and extinguish before they can enter a cyclone / collector. There are no
moving parts and no power is required for operation. Pressure loss is minimal.

Quick-Fit clamp-together ducting eliminates rivets, screws, and welding, significantly reducing the time required to install or replace
ducting. The Nordfab In-line Spark Trap can quickly and easily be mounted into Quick-Fit ducting systems, or other duct systems with use of a Nordfab adapter, and the trap can easily be
removed for cleanout. Calibration or other assistance from a factory technician is not required.

The Nordfab In-line Spark Trap is a simple, low-cost tool that can reduce incidents of fire events, reducing costs and disruption and improving safety. System redundancy and complementary measures should be applied.

Видео Nordfab In-line Spark Trap канала Nordfab Ducting