Popping Light Bulbs With High Voltage
A few different types of automotive light bulbs get popped with high voltage. Most were fine with the two MOT's in parallel giving out 2,100 volts and 1.5-2 amps. The halogen was seen in the first high voltage video and needed 4kv to initiate an arc, which had to wait for the arrival of the second MOT.
I still have a box full of stuff to pop, I'm just waiting for warm weather because I have to do it outside with the nasty smoke it will create.
MOT's are dangerous, and should not be used unless you have a full understanding of how to use them safely.
Видео Popping Light Bulbs With High Voltage канала InductiveExperiments
I still have a box full of stuff to pop, I'm just waiting for warm weather because I have to do it outside with the nasty smoke it will create.
MOT's are dangerous, and should not be used unless you have a full understanding of how to use them safely.
Видео Popping Light Bulbs With High Voltage канала InductiveExperiments
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Information Panel Stage OneCapacitor explosionQuick MOT Arc Test With AmmeterA Box of Electronics + UpdateInformation Panel Live Test-Popping a CRT FilamentPopping Capacitors - Up Close Look4KV on Twigs and Spark Plugs500 Volts On a PlantPopping Capacitors and Other ElectronicsBranch on a power line in small scaleCapacitor FireworkWater Bottle Bomb Explosion First TestPopping 60 Water Bottles in 45 Minutes on the 4th of July, 2013Information Panel Stage TwoPopping Transformers, Capacitors, and Other Electronics4KV MOT Test with Jacob's LadderClose Lightning StrikeTesting Bad Fluorescent Tubes With a Flyback TransformerMy New Broken Electric Meter (KWH)Flyback Transformer Arcs