How to clean TURBO without removing !

---------------------
Enjoj!
-----------------------------------
Hi! (This is not mine product, and not sponsored)

For all gasoline and diesel turbines.
Usage: Start the engine and let it warm up. Remove the air intake system of a flexible hose located between air filter boxes and turbocharger / intermediate compressed air cooler. Petrol engines set 2000 rpm. Diesel engines left idle, never not to press the accelerator pedal. In warm engine spray directly to the turbine inlet. Spray in short interval in order to avoid or unexpected high Increase engine speed and engine detonation. After injection wait for a turn again to return to the original level. If need that gasoline engine falter click accelerator.Diesel engines Never press the accelerator. Continue cleaning UNTIL worn all 200 ml aerosol dispenser. Leave the engine to idle for a few minutes. Turn off the engine. Re-connect the air intake hose. Run the engine accelerator 5-10 times (max. Up to 3000 rpm / min), or a car to pass 5-10 km (within the limits of 3000 rpm / min.) Before turning off the engine leave few mins to work.
----------------------------------------
Have any questions?? Ask me in comments !!!
----------------------------------------------------

-------------------------------------------------------------
Dont forget to hit *LIKE - SUBSCRIBE* and share with your friends !
----------------------------------------------------------------------------

----------------------------------------------------------------------------------------
Bye, see You soon !!
-----------------------------------GetWork-----------------------------------

Видео How to clean TURBO without removing ! канала GetWork