How to Operate the Sterlitech Forward Osmosis Filtration System
Check out this visual guide on how to operate the Sterlitech Forward Osmosis Filtration System.
Sterlitech Benchtop Forward Osmosis Filtration System
The compact, intuitive design of the Benchtop Low Pressure Filtration Unit can be adapted to form either a Forward Osmosis or
Membrane Distillation System. Either configuration has the option to log the pressure and flow data of both units simultaneously.
The FO configuration utilizes carboys for applications not requiring temperature control.
System Features:
Cell Type: FO Flat Sheet Cells
Configuration: 1 Line, No Bypass
Feed Flow Rate: 3.2 LPM (0.84 GPM)
Max Pressure: 5.5 bar (80 psi)
Max Temperature: 82C (180F)
Electrical Supply: 110V/230V, 50/60Hz, 1Ph
Motor Rating: PTFE and PEEK MicroPump
Data Recording: Option Available
Feed/Draw Tanks FO: Polycarbonate, 10 Liter (2.5 Gallon) Capacity
System Dimensions FO: 132 cm x 42 cm x 40 cm (52 in x 17 in x 16 in)
====================
Follow these steps to set up the Sterlitech FO Filtration Kit
1. Put membrane in the cell
2. Assemble the cell
3. Tighten the knobs
4. Fill the tanks
5. Plug in the pumps
6. Turn the pumps on
7. Set the pump speeds using speed knobs
8. Adjust the pressure using the pressure control valves
9. Re-adjust the speed if needed
*Note the change in weight on the scale
====================
Interested in Sterlitech benchtop FO filtration kits? Find the perfect plug-and-play unit for your RO, NF, UF, or MF experiments here: https://tinyurl.com/2byhh5yb
For other product inquiries, contact us here: https://tinyurl.com/58chxh53 or call us at 1-877-544-4420
Видео How to Operate the Sterlitech Forward Osmosis Filtration System канала Sterlitech Corporation
Sterlitech Benchtop Forward Osmosis Filtration System
The compact, intuitive design of the Benchtop Low Pressure Filtration Unit can be adapted to form either a Forward Osmosis or
Membrane Distillation System. Either configuration has the option to log the pressure and flow data of both units simultaneously.
The FO configuration utilizes carboys for applications not requiring temperature control.
System Features:
Cell Type: FO Flat Sheet Cells
Configuration: 1 Line, No Bypass
Feed Flow Rate: 3.2 LPM (0.84 GPM)
Max Pressure: 5.5 bar (80 psi)
Max Temperature: 82C (180F)
Electrical Supply: 110V/230V, 50/60Hz, 1Ph
Motor Rating: PTFE and PEEK MicroPump
Data Recording: Option Available
Feed/Draw Tanks FO: Polycarbonate, 10 Liter (2.5 Gallon) Capacity
System Dimensions FO: 132 cm x 42 cm x 40 cm (52 in x 17 in x 16 in)
====================
Follow these steps to set up the Sterlitech FO Filtration Kit
1. Put membrane in the cell
2. Assemble the cell
3. Tighten the knobs
4. Fill the tanks
5. Plug in the pumps
6. Turn the pumps on
7. Set the pump speeds using speed knobs
8. Adjust the pressure using the pressure control valves
9. Re-adjust the speed if needed
*Note the change in weight on the scale
====================
Interested in Sterlitech benchtop FO filtration kits? Find the perfect plug-and-play unit for your RO, NF, UF, or MF experiments here: https://tinyurl.com/2byhh5yb
For other product inquiries, contact us here: https://tinyurl.com/58chxh53 or call us at 1-877-544-4420
Видео How to Operate the Sterlitech Forward Osmosis Filtration System канала Sterlitech Corporation
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![How to Select the Right Polymeric Flat Sheet Membrane | Webinar by Sterlitech](https://i.ytimg.com/vi/r7xOi47C4s0/default.jpg)
![Sepa CF Cell Animated Cross/Tangential Flow | Demo | Sterlitech](https://i.ytimg.com/vi/POSMQJ6KAzQ/default.jpg)
![How to Assemble the Sterlitech CF047X Cell](https://i.ytimg.com/vi/McDMApc3Ppk/default.jpg)
![Sterlitech CF042 Stainless Steel Bench System, 4 Cells](https://i.ytimg.com/vi/maZ2_dGjWoY/default.jpg)
![How to Install the Sterlitech CF042/CF016 Cell on Benchtop System](https://i.ytimg.com/vi/aanfjwzco9k/default.jpg)
![Analog Skids Final - Sterlitech](https://i.ytimg.com/vi/GzFzIqLg4ro/default.jpg)
![CF042 2 Line System](https://i.ytimg.com/vi/He4r7-_twgE/default.jpg)
![How to Assemble the Sterlitech HP4750X Stirred Cell](https://i.ytimg.com/vi/u6i-whDKGtE/default.jpg)
![CF042 FORWARD OSMOSIS, VIRGIN PTFE, CELL ASSEMBLY](https://i.ytimg.com/vi/0urMeDfGVpw/default.jpg)
![Assemble an Unassembled Bench System](https://i.ytimg.com/vi/dPV85odwWRA/default.jpg)
![Hydra-cell Pump - Decoupling and Repair](https://i.ytimg.com/vi/CekbB-whi6Q/default.jpg)
![CF016 FORWARD OSMOSIS, CLEAR CAST ACRYLIC, CELL ASSEMBLY](https://i.ytimg.com/vi/j6d1scWSwhs/default.jpg)
![Sterlitech Low-Volume Benchtop System Overview](https://i.ytimg.com/vi/gSbrWfaJnRQ/default.jpg)
![Silver Membranes.wmv](https://i.ytimg.com/vi/U-P9nmyMj8U/default.jpg)
![CF016SS FO](https://i.ytimg.com/vi/UBRewTDr9f8/default.jpg)
![Sterlitech Benchtop System Initial Setup](https://i.ytimg.com/vi/v2fWZ_rgPV0/default.jpg)
![Membrane Wettability Demo by Sterlitech](https://i.ytimg.com/vi/NkNU-C4wQqg/default.jpg)
![CF016 FORWARD OSMOSIS CELL ASSEMBLY, PTFE](https://i.ytimg.com/vi/KznRQA-J9sc/default.jpg)
![Sterlitech Analog Explorer Skid System: How to Start, Operate, and Shutdown](https://i.ytimg.com/vi/3-bMPv-rIWg/default.jpg)
![Bubble Point Testing, Membrane Disc Filters Testing by Sterlitech](https://i.ytimg.com/vi/L_GGfJ12c5A/default.jpg)
![Sterlitech Cross Flow Test Cell Materials of Construction](https://i.ytimg.com/vi/lQPMLpyS4a8/default.jpg)