DIY Bedrail Guard (PVC, low cost)

Needed a bedrail guard for an IKEA SLÄKT twin size bed. We made this for just under $15 (the PVC cement was $6 of that). They cut the PVC pieces at the home improvement store where we purchased the PVC.

Supplies needed:
PVC cement,
Two - 1/2” x 1/2” Elbow PVC Fitting,
Two - 1/2” x 1/2” x 1/2” Side Outlet Elbow PVC Fitting,
Two - 1/2” x 1/2” Tee PVC Fitting,
Two 10’ long 1/2” PVC pipes (cut into seven pieces sized at 1 1/2 feet and two pieces sized at 3 feet long,
damp rag or paper towel for cleaning PVC,
flathead screwdriver for opening PVC cement,
fabric approximately 42" x 48" (I recycled an old blanket for this)

For the cover I used an old blanket cut at 42” x 48”. Sewed the sides up and slipped it on. Made it longer than the height of the bedrail so it could tuck under the mattress snuggly.

Видео DIY Bedrail Guard (PVC, low cost) канала daiqarita