Electroplating 3D Prints - Super Smooth
Metal Plate your 3D Prints to a super shiny finish! It is more easy than you thought.
This is about #DIY #Plating #3Dprints, as well as sanding 3D prints to the max!
Chapters
00:00 Introduction
00:29 Printing the Object
01:52 Making 3D Prints electrically conductive
03:19 Metal Plate 3D Prints in a copper bath
05:00 How to create a heavy shine on 3D prints
06:04 Electro Plating 3D Prints with the galvanic pen
07:20 Conclusion
***I have not received any of the products shown free of charge, nor do I have any relationship with the manufacturer.**
~~~~~~~~~~~~~~~~~~~
Model I printed for this Video 📢
* MIB 1 Neuralyzer V. 2: https://www.thingiverse.com/thing:2823751
~~~~~~~~~~~~~~~~~~~
For the prints I used:
* Elegoo Standard Resion Translucent Red
* Elegoo Mars Resin Printer
For the Conductivity I used
* Tiffoo Conductive Copper Paint
* DEWEPRO Graphite Spray
! Make sure that it can be used with your copper electrolyte.
For the galvanic bath:
* a container
* copper electrolyte (sour)
* one or two copper anodes
* banana plug & alligator clips
For the galvanic pen plating:
* Palladium Electrolyte
* Graphite Anode
You may need:
* Degreaser
* Distilled water
Have fun. Try it. 🧡
Have a look to my other Videos
######################
DIY Electroplating 3D Prints ... (the shiny way) 🧪
https://youtu.be/8m1kYK_U66I
Metal Plating a Monkey Island Verb Coin
https://youtu.be/T7LisLLY7b4
DIY Patinate 3D prints
https://youtu.be/KTnK1ct8KkI
Видео Electroplating 3D Prints - Super Smooth канала HEN3DRIK - Electroplating 3D Prints
This is about #DIY #Plating #3Dprints, as well as sanding 3D prints to the max!
Chapters
00:00 Introduction
00:29 Printing the Object
01:52 Making 3D Prints electrically conductive
03:19 Metal Plate 3D Prints in a copper bath
05:00 How to create a heavy shine on 3D prints
06:04 Electro Plating 3D Prints with the galvanic pen
07:20 Conclusion
***I have not received any of the products shown free of charge, nor do I have any relationship with the manufacturer.**
~~~~~~~~~~~~~~~~~~~
Model I printed for this Video 📢
* MIB 1 Neuralyzer V. 2: https://www.thingiverse.com/thing:2823751
~~~~~~~~~~~~~~~~~~~
For the prints I used:
* Elegoo Standard Resion Translucent Red
* Elegoo Mars Resin Printer
For the Conductivity I used
* Tiffoo Conductive Copper Paint
* DEWEPRO Graphite Spray
! Make sure that it can be used with your copper electrolyte.
For the galvanic bath:
* a container
* copper electrolyte (sour)
* one or two copper anodes
* banana plug & alligator clips
For the galvanic pen plating:
* Palladium Electrolyte
* Graphite Anode
You may need:
* Degreaser
* Distilled water
Have fun. Try it. 🧡
Have a look to my other Videos
######################
DIY Electroplating 3D Prints ... (the shiny way) 🧪
https://youtu.be/8m1kYK_U66I
Metal Plating a Monkey Island Verb Coin
https://youtu.be/T7LisLLY7b4
DIY Patinate 3D prints
https://youtu.be/KTnK1ct8KkI
Видео Electroplating 3D Prints - Super Smooth канала HEN3DRIK - Electroplating 3D Prints
Показать
Комментарии отсутствуют
Информация о видео
4 сентября 2021 г. 20:45:01
00:07:54
Другие видео канала
Build better props | Electroplating 3D PrintsSuper Shiny 3D Prints ✨Super Shiny 3D Prints | DIY ElectroplatingExtreme Cosplay Props!Electroplating 3D Prints | Master Sword TutorialEasy 3D Prints to Metal!! 😜Electroplating 3D Prints | Color MetalMetallize your 3D Prints!Electroplating 3D Prints | New Graphite TutorialEpic 3D Printed Lightsaber: You Have to See It to Believe It 🤯Electroplating 3D Prints | Lightsaber TutorialIs it ok to cast into 3D Prints?Cast Into 3D Prints | ElectroplatingMetalize huge plastic 3D Prints! 🧪Electroplating 3D Prints | Helmets Tutorial 1Electroplating 3D Prints | Swords Tutorial 1Can‘t believe this was 3D printed 😍 #shortsElectroplating 3D Prints | Thermal DetonatorGolden 3D Prints! 🥇#shortsElectroplating 3D Prints | Rings TutorialI thought i could improve the sound... #fail #shorts