Measured output from Green Fuel H2O Gfx1 v6 dry cell HHO gen today.

I built an HHOMETER yesterday and used it this morning to measure the output from my HHO gen. The outside temp was about 43 degrees F. The amperage draw at startup was about 28.x amps and the voltage from my alternator showed 14.4 volts on my ScanGaugeII. I verified the amp draw with a clamp on ampmeter. The unit produced 500ml in 30 seconds or 1 liter per minute. I tested the unit in the afternoon again and the amp draw was at 30 amps, the voltage was at 14.3 v and the outside temp was about 65 degrees F. My electrolyte temp was at 94 degrees F. The cell produced 500ml in 35 seconds. I thought the unit would produce more gas at a higher temperature but I measured the opposite result. Any comments welcome! Steven

Видео Measured output from Green Fuel H2O Gfx1 v6 dry cell HHO gen today. канала GreenTunesPerformanc