Whirlpool Zen Washing Machine Test Mode & Service to run Diagnostic Procedure

Entering test mode or service mode on your Whirlpool Zen FSCR 10431 washing machine is a great way to help diagnose faults. Visit our shop for Whirlpool parts https://shop.how-to-repair.com/.

The test sequence runs through all the main wash features, testing components like the water valves, pressure switches that operate the fill cycle, the heating system (including the NTC sensor and heating element controlled by the program board (PCB) via relays), and of course, the motor and pumps to ensure the drum turns and water empties.

This video will guide you through entering test mode, which can be tricky at times, and explain all six individual tests it runs. This Test is suitable for models like these Whirlpool models FSCR 10431, FSCR 12430, FSCR 12442, FSCR10432, FSCR10432 S, FSCR12430, FSCR70411, FSCR80416, FSCR80421 and some Bauknecht models WA Prime 1054, WA Prime 1054 Z,

C00: This test checks the main program function and door lock, then searches for related error codes (F02, F05, F07, F08, F13, F20, F21, F24, F26, F27, F29, F36, F60).

C01: This test checks the motor's rotation (clockwise and anticlockwise), water valves, and pressure switch system. It then searches for related error codes (F01, F36, F06, F07, F10).

C02: This test checks the heating system's function. It activates the heating element for approximately 10 seconds and shows the temperature reading from the NTC sensor. It then searches for related error codes (F06, F07, F27).

C03: This test checks the recirculation water pump, then switches to the main pump that empties the water. It then searches for related error codes (F0 3, F06, F07, F15, F26, F27).

C04: This is a long test that checks the drum for imbalance, displaying the detected imbalance on the display in kilograms and grams. It then tests the motor function up to the maximum RPM the machine was designed for. It then searches for related error codes (F06, F07, F28, F34).

C05: This test simply shuts down the power supply to the motor, allowing it to brake to a stop. Once the drum has stopped, it allows the door to open and turns off all power to the CPU It then searches for related error codes (F13, F29 FdL).🔧

🛒 * our website*
https://www.how-to-repair.com/

⏲️ We've added timestamps below to make it easier for you to navigate this video:

00:00 Whirlpool Washing Machine Zen Test & Diagnostic Mode
01:37 How to Enter the Test Mode
03:04 Exploded Diagram of Whirlpool Washing Machine Zen
03:25 C0 Test Mode Codes
05:24 Entering the Test Mode

🌟 Stay up-to-the-minute with our appliance repair guides and tips! Smash that subscribe button and ring the bell 🔔 for the latest updates: [Subscribe and Stay Updated!] (https://www.youtube.com/@How-to-repair/?sub_confirmation=1)

💖 Your support is our backbone, and if our videos or website have been a beacon of help, sharing them on your timeline means the world to us! 🌐

🍻 Saved a few quid or clocked some extra time thanks to our tips? Feel free to [Buy Paul a Beer](http://how-to-repair.com/help/buy-paul-a-beer/)—it's cheers from us to you for keeping the advice river flowing!

👍 Make us your go-to by marking us as your favorite. If our content hits the spot, give us a follow on social media for an ongoing treasure trove of appliance wisdom. Your support amplifies our work and keeps our community thriving.

*Questions* - have a question? do not hesitate to leave your question below as a comment and I will try my best to answer.

*Follow us on Social Media:*
https://www.facebook.com/how.to.repair.appliances
https://www.instagram.com/how_to_repair_appliances/

#WhirlpoolWashingMachine #WhirlpoolTestMode #WhirlpoolServiceMode

Видео Whirlpool Zen Washing Machine Test Mode & Service to run Diagnostic Procedure канала how-2-repair.com