OUR BRONCO SAYS GOODBYE TO THE FACTORY KICK PANEL SPEAKERS
WE SAY GOODBYE TO FACTORY KICK PANEL SPEAKERS!
The stock 6.5” speakers on the Bronco Big Bend sound ok, but what if they could be…I don’t know…BETTER? Well, we decided to switch them out too with ones that have tweeters in the middle of them, so we will soon find out if swapping out stock with new actually made a noticeable difference.
Like all our Bronco upgrades, this does not come without some sort of modification. We had to get a boom mat cover for it to help contain the air & sound, so it shoved it out forward rather than into the empty space within the side panel of the front of the vehicle.
This was and wasn’t the easiest install. Getting it out was no problem. Getting the new speaker settled into its new home was a pain. At least for me it was. Shawn is used to working on these things whereas I am not. I had a difficult time where Shawn had to take over from time to time to get the job done. Thank you dear! :D
The kind of speakers we got are Pioneer TS-G1620F 6-1/2" 2-Way Coaxial Speakers. The link is down below of where we got the speakers, as well as the other items. 😊
After installation, we tested the speakers out to a song with lot of base and treble, and WHAT a DIFFERENCE! It sounds a lot better. Changing out the cheapo speakers with better quality speakers, really help change the way the music sounds. Speakers are like vacuums and kitchen knives – you get what you pay for. The cheap stuff isn’t always the best. Pay a bit more and you get better quality items.
Thank you again for watching! As always, please like, share, subscribe, hit the bell, and drop a comment down below.
Let us know what you think of your stock speakers in your bronco. Now do realize, each trim level will have different speakers. This was a cheap “base” of its trim level – which technically is the 2nd up from the Base, itself. I would expect cheap products in a cheap vehicle.
The Badlands we will be getting will have a higher quality speaker system (we suspect) for it is fully loaded and maxed out on options. It shouldn’t sound like a tin can.
Oh, and Jill is doing YouTube full time now as a job (no joke) - we ask that you please watch all the way through, share the video, for we get paid a small amount per viewing.
LINKS TO ITEMS WE USED:
Pioneer TS-G1620F 6-1/2" 2-Way Coaxial Speaker
https://www.amazon.com/gp/product/B07595G6H7/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
Speaker Wire Adapters
https://www.amazon.com/gp/product/B01GEIOZYS/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
Design Engineering 050330 Boom Mat Speaker Baffles, 6.5" Round
https://www.amazon.com/gp/product/B0039Z3SRA/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
Metra 82-5605 Rear 6.5" Speaker Plate
https://www.amazon.com/gp/product/B01BTSVXWK/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
PAC - BB4PR BB-4PR Pair of 4" Bass Blocker
https://www.amazon.com/gp/product/B009F7YM0S/ref=ppx_yo_dt_b_asin_title_o09_s01?ie=UTF8&psc=1
Видео OUR BRONCO SAYS GOODBYE TO THE FACTORY KICK PANEL SPEAKERS канала 1Five1 Garage
The stock 6.5” speakers on the Bronco Big Bend sound ok, but what if they could be…I don’t know…BETTER? Well, we decided to switch them out too with ones that have tweeters in the middle of them, so we will soon find out if swapping out stock with new actually made a noticeable difference.
Like all our Bronco upgrades, this does not come without some sort of modification. We had to get a boom mat cover for it to help contain the air & sound, so it shoved it out forward rather than into the empty space within the side panel of the front of the vehicle.
This was and wasn’t the easiest install. Getting it out was no problem. Getting the new speaker settled into its new home was a pain. At least for me it was. Shawn is used to working on these things whereas I am not. I had a difficult time where Shawn had to take over from time to time to get the job done. Thank you dear! :D
The kind of speakers we got are Pioneer TS-G1620F 6-1/2" 2-Way Coaxial Speakers. The link is down below of where we got the speakers, as well as the other items. 😊
After installation, we tested the speakers out to a song with lot of base and treble, and WHAT a DIFFERENCE! It sounds a lot better. Changing out the cheapo speakers with better quality speakers, really help change the way the music sounds. Speakers are like vacuums and kitchen knives – you get what you pay for. The cheap stuff isn’t always the best. Pay a bit more and you get better quality items.
Thank you again for watching! As always, please like, share, subscribe, hit the bell, and drop a comment down below.
Let us know what you think of your stock speakers in your bronco. Now do realize, each trim level will have different speakers. This was a cheap “base” of its trim level – which technically is the 2nd up from the Base, itself. I would expect cheap products in a cheap vehicle.
The Badlands we will be getting will have a higher quality speaker system (we suspect) for it is fully loaded and maxed out on options. It shouldn’t sound like a tin can.
Oh, and Jill is doing YouTube full time now as a job (no joke) - we ask that you please watch all the way through, share the video, for we get paid a small amount per viewing.
LINKS TO ITEMS WE USED:
Pioneer TS-G1620F 6-1/2" 2-Way Coaxial Speaker
https://www.amazon.com/gp/product/B07595G6H7/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
Speaker Wire Adapters
https://www.amazon.com/gp/product/B01GEIOZYS/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
Design Engineering 050330 Boom Mat Speaker Baffles, 6.5" Round
https://www.amazon.com/gp/product/B0039Z3SRA/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
Metra 82-5605 Rear 6.5" Speaker Plate
https://www.amazon.com/gp/product/B01BTSVXWK/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
PAC - BB4PR BB-4PR Pair of 4" Bass Blocker
https://www.amazon.com/gp/product/B009F7YM0S/ref=ppx_yo_dt_b_asin_title_o09_s01?ie=UTF8&psc=1
Видео OUR BRONCO SAYS GOODBYE TO THE FACTORY KICK PANEL SPEAKERS канала 1Five1 Garage
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![We Installed IAG EZ-Pull Soft Top Release & Immediately Ran Into Problems That You Won't Have To.](https://i.ytimg.com/vi/12AwnLKfGHE/default.jpg)
![SUSAN PART 4: INTAKE FABRICATION - SHE SAID I NEEDED A BIGGER PIPE!?!](https://i.ytimg.com/vi/1OcSXFwhsOc/default.jpg)
![We Made Oracle's Coolest Taillights Even Cooler...](https://i.ytimg.com/vi/iCCGS4BOldk/default.jpg)
![Surprised A Cancer Survivor With A Custom Bronco Console Badge from Archetype Racing!](https://i.ytimg.com/vi/G4TMJt6gaY0/default.jpg)
![BEAST: OUR F-350 "BEAST" GETS A NEW GRILLE! | GRILLE UPGRADE FOR BEAST | INSTALLATION OF NEW GRILLE](https://i.ytimg.com/vi/nZQwo9rGC_4/default.jpg)
![Fixing Our Bronco Black Diamond Body Alignment Issues. Easy or Hard? Either Way, It Need To Be Done.](https://i.ytimg.com/vi/3mJGVJ3nELU/default.jpg)
![SUSAN PART 1: IT'S BEEN ALMOST A DECADE...](https://i.ytimg.com/vi/6j6sSjRvRkE/default.jpg)
![GIVING AWAY A BRONCO BYOD RAIL FROM ARCHETYPE RACING WHEN WE HIT 3000 SUBS #short](https://i.ytimg.com/vi/OjRwxFX434k/default.jpg)
![BRONCO OFF-ROADEO, MOAB. UNCUT VERSION. THIS MUCH FUN SHOULD BE ILLEGAL.](https://i.ytimg.com/vi/uNI0bDS5Yp4/default.jpg)
![Episode 10: Rally Mustang Body Panel Replacement. Wasn't Expecting To Find What We Did...](https://i.ytimg.com/vi/j1-odDj6xqk/default.jpg)
![HAPPY HOLDIAYS FROM 1FIVE1 GARAGE.](https://i.ytimg.com/vi/CCNw3IJB37k/default.jpg)
![SUSAN PART 16: TIME TO FIGURE OUT THE STEERING | STEERING COLUMN | STEERING WHEEL PLACEMENT](https://i.ytimg.com/vi/1f35stfQ-gI/default.jpg)
![HERITAGE BRONCO BODY PANELS: IS IT CHEAPER TO REPLACE & PAINT or TRADE IN FOR NEW VEHICLE?](https://i.ytimg.com/vi/Hlu8nxUctkU/default.jpg)
![SUSAN PART 7: INSALLING FUEL LINES, PRESSURE GAUGE ON DUAL CARBS WITH TUNNEL RAM SET UP](https://i.ytimg.com/vi/DPX-COayqgw/default.jpg)
![Bronco Sport G.O.A.T. Mode Animation](https://i.ytimg.com/vi/gGyFZxS6_bQ/default.jpg)
![BEAST: WRAPPED OR PLASTI -DIP? | COMPARING TWO MATERIALS FOR MIRROR CAPS](https://i.ytimg.com/vi/cRl5lLklVnE/default.jpg)
![OUR ENTIRE MODEL BRONCO TOYS COLLECTION! | BRONCO MODELS AND TOYS | MODELS AND TOYS OF THE BRONCO](https://i.ytimg.com/vi/TEpzmzUiQ5g/default.jpg)
![JILL'S DREAM BRONCO REVEAL COMING TOMORROW.](https://i.ytimg.com/vi/PD4gIgA172c/default.jpg)
![PT. 10: CANTILEVER SEATING | INSTALLING CANTILEVER SEATS | CANTILEVER SEATS INSTALL | CANTILEVER](https://i.ytimg.com/vi/V_ttlDadpp4/default.jpg)
![NovSight's 3" HALO lights](https://i.ytimg.com/vi/8sOs4ihrDHg/default.jpg)
![PT. 11: BED SIDE STAKE FABRICATION | FABRICATION BED SIDE STAKES | CUSTOM MADE BED STAKE FABRICATION](https://i.ytimg.com/vi/6ywxh_rJLTA/default.jpg)