Walkera QR X350 Upgraded v1.32 Firmware

Upgraded latest v1.2 firmware from walkera website, This v1.2 firmware improve for Auto Level on Manual mode also GPS mode as well.
This v1.2 firmware also improve the battery flying time, tested used Walkera 2200Mah 3S Lipo can fly for 10 minutes, but for the safety i advise to set your devo transmitter count times for 8 to 9 minute then landing.
This video also to showing you that i replaced the original stock motors to Turnigy MultiStar 2213-935kv stock motors and Carbon Fiber Propellers.
For replace this Turnigy MultiStar motors you need to modify little for the motor mounting holes on your QR X350 frame, this motors also can run QR X350 original stock propeller as well.

Walkera Latest v1.32 firmware can get it here: http://walkera.com/en/upload/helicopter/X350-V1.32.zip

Turnigy MultiStar 2213-935kv motors: http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=43884&aff=880250

Carbon Fiber Propellers: http://www.banggood.com/Walkera-QR-X350-RC-Quadcopter-Replacement-Carbon-Fiber-Propeller-Blade-p-907395.html?p=762503080763201209MY

Видео Walkera QR X350 Upgraded v1.32 Firmware канала Nelson Lee