Part 3 of 3 - Woodturning: Can I do it with carbide
Part 3 of a 3 part video. Turning a simple bowl with carbide tools, facegrain hollowing.
This is one long video, broken up into three parts. I go through many basic cuts and operations of woodturning and demonstrate how to do them with carbide tools.
I confess I’m not an expert at everything shown here – my beads could use some work, that’s for sure! But in the end, I get it done, I think.
Part 1: http://youtu.be/k0ismyEFLCI
Part 2: http://youtu.be/cmaUUSUQw4E
Part 3: http://youtu.be/ZQELtpCBdVU
Here are the makers of the carbide tools I use:
Harrison Specialties: http://www.harrisonspecialties.com/welcome-to-the-home-of-simple-wood-turning-tools/ (I have the Simple Rougher, Simple Turner and Hollower, the Simple Shear Cutting Finisher, and the Simple 55* Detailer. I also have one tool handle from this site.)
Mike Hunter: http://www.hunterwoodturningtool.com/ (I have the Hunter Osprey tool)
Glenn Teagle (UK): http://www.ukwoodcraftandcarbidechisels.co.uk/ (I have the hexagon bar hollowing chisel, with a homemade handle)
Easy Wood tools: http://www.easywoodtools.com/ (I have the Easy Detailer)
Check out Eddie Castelin on Youtube. Also visit his site to buy carbide cutters – he has many popular sizes. Just measure the ones you have, see if he has one that will fit.
http://www.eddiecastelin.com/
Видео Part 3 of 3 - Woodturning: Can I do it with carbide канала SJWoodworks
This is one long video, broken up into three parts. I go through many basic cuts and operations of woodturning and demonstrate how to do them with carbide tools.
I confess I’m not an expert at everything shown here – my beads could use some work, that’s for sure! But in the end, I get it done, I think.
Part 1: http://youtu.be/k0ismyEFLCI
Part 2: http://youtu.be/cmaUUSUQw4E
Part 3: http://youtu.be/ZQELtpCBdVU
Here are the makers of the carbide tools I use:
Harrison Specialties: http://www.harrisonspecialties.com/welcome-to-the-home-of-simple-wood-turning-tools/ (I have the Simple Rougher, Simple Turner and Hollower, the Simple Shear Cutting Finisher, and the Simple 55* Detailer. I also have one tool handle from this site.)
Mike Hunter: http://www.hunterwoodturningtool.com/ (I have the Hunter Osprey tool)
Glenn Teagle (UK): http://www.ukwoodcraftandcarbidechisels.co.uk/ (I have the hexagon bar hollowing chisel, with a homemade handle)
Easy Wood tools: http://www.easywoodtools.com/ (I have the Easy Detailer)
Check out Eddie Castelin on Youtube. Also visit his site to buy carbide cutters – he has many popular sizes. Just measure the ones you have, see if he has one that will fit.
http://www.eddiecastelin.com/
Видео Part 3 of 3 - Woodturning: Can I do it with carbide канала SJWoodworks
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![# 180 The basic bowl with Carbide tools](https://i.ytimg.com/vi/LBd53zcUwIQ/default.jpg)
![Part 2 of 3 - Woodturning: Can I do it with carbide](https://i.ytimg.com/vi/cmaUUSUQw4E/default.jpg)
![Part 1 of 3 - Woodturning: Can I do it with carbide](https://i.ytimg.com/vi/k0ismyEFLCI/default.jpg)
![Doug Schneiter - Basket Illusion 2.0, Beading with D-Way tools](https://i.ytimg.com/vi/jpewBjiAHmk/default.jpg)
![Woodturning - How to Turn Off Center Bowl](https://i.ytimg.com/vi/YUvRtlMdQSM/default.jpg)
![# 216 the Care and Feeding of Carbides](https://i.ytimg.com/vi/WHM8fCklULI/default.jpg)
![DIY- Learn to Turn Barley-Twist Candlesticks on the Lathe](https://i.ytimg.com/vi/nBGaFR5ZxuE/default.jpg)
![The Basic Box by Ray Key (Woodturning How-to)](https://i.ytimg.com/vi/I_eqrAYcwKo/default.jpg)
![Woodturning - Spalted Starburst Birch Bowl](https://i.ytimg.com/vi/tJu1yftba0Y/default.jpg)
![# 206 Glass finish Cocobolo](https://i.ytimg.com/vi/g-vEzUBGsts/default.jpg)
![Turn Your First Bowl - A video class on bowl turning.](https://i.ytimg.com/vi/D_P8Fm5-aVs/default.jpg)
![#15 Dark Birch Bowl & Carbide Tools for Beginners - Wood Turning - Acolyte Turner](https://i.ytimg.com/vi/v6ZfsfOWKMc/default.jpg)
![Woodturning ambrosia maple form with carbide tools and disaster](https://i.ytimg.com/vi/Mtvywk8jFOo/default.jpg)
![Carbide Resurrections # 122](https://i.ytimg.com/vi/xDExwGjYJcc/default.jpg)
![Introducing EasyWood Woodturning Tools](https://i.ytimg.com/vi/7QUFjHdni2Q/default.jpg)
![Experiment in turning a plywood and hardwood bowl](https://i.ytimg.com/vi/L7y7jH75eKM/default.jpg)
![Sharpening Wood Turning Tools - A Twist on Carbide Cutters](https://i.ytimg.com/vi/txImQIL5Pkk/default.jpg)
![Spindle Tools for Woodturning: cutting and sharpening by Sam Angelo](https://i.ytimg.com/vi/HeAcWrAPeF4/default.jpg)
![Using a bowl Gouge](https://i.ytimg.com/vi/tsXvrZz-k1g/default.jpg)
![Turning tools: Carbide vs. HSS - Which is better? (Making a wooden mallet)](https://i.ytimg.com/vi/Kx-mcfd7FwU/default.jpg)