Mating a chuck to a rotary table.
This video is about mating a 6", 3-jaw chuck to a 10", H/V rotary table. The plate is 1/2" thick and is secured to the chuck by three socket head cap screws. The plate is then clamped to the rotary table by standard four 3/8" t-nuts and bolts.
Видео Mating a chuck to a rotary table. канала Bill Chennault
Видео Mating a chuck to a rotary table. канала Bill Chennault
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Machining a New Rotary Table Adapter Plate](https://i.ytimg.com/vi/9jbyJoqnMfI/default.jpg)
![Improving the vertex rotary table - Part 1](https://i.ytimg.com/vi/DTRc5B1HcRc/default.jpg)
![Rotary Table Basics](https://i.ytimg.com/vi/oQtO0VELAi8/default.jpg)
![Fitting Backplate to 3"Chuck, For 4" Rotary Table](https://i.ytimg.com/vi/d-juY62F3Nw/default.jpg)
![Scrap Built Rotary Table (Part 2)](https://i.ytimg.com/vi/Hz1y2bLUH6g/default.jpg)
![Cheap and Cheerful 5C Collet Chuck](https://i.ytimg.com/vi/F0hu8BUwPi8/default.jpg)
![Fabricando flange para placa de torno](https://i.ytimg.com/vi/Sh_onyAdGMs/default.jpg)
![A Brief Chat about Carbide Tooling](https://i.ytimg.com/vi/rsFFWYo8ugw/default.jpg)
![Самодельный поворотный столик - homemade rotary table](https://i.ytimg.com/vi/8hbf9716cg4/default.jpg)
![🔥 Making a Lathe Chuck Back Plate](https://i.ytimg.com/vi/mI_y3TO9oOo/default.jpg)
![ROTARY TABLES, how to cut an angle, how to produce a disc, how to accurately radius corners](https://i.ytimg.com/vi/n9uN8-jg0Gg/default.jpg)
![Welding & Cutting rotary table - BUILD](https://i.ytimg.com/vi/BaUO8CMOS5I/default.jpg)
![Rotary Table Chuck Mount](https://i.ytimg.com/vi/dx0m0mL9470/default.jpg)
![Making A Lathe Chuck Back Plate](https://i.ytimg.com/vi/uAQLrM1P-YQ/default.jpg)
![Soba 5" / 125 mm Rotary Table , Chuck , Dividing Set Kit [unboxing, review, setup and first test]](https://i.ytimg.com/vi/RzmqjxgVUAM/default.jpg)
![Center a Rotary Table in Under a Minute Without an Indicator](https://i.ytimg.com/vi/GjezShYnoEU/default.jpg)
![Disassembling and Cleaning a Three Jaw Lathe Chuck and Machining a New Back Plate](https://i.ytimg.com/vi/LGbKMlIRV_E/default.jpg)
![Machining a 3-5 Indexing Jig Using the Rotary Table](https://i.ytimg.com/vi/eP4j9AhiXw0/default.jpg)
![A FIRST TIME CUTTING GEARS](https://i.ytimg.com/vi/-1wjU1_ZpCQ/default.jpg)
![Homemade Lever Operated Rotary Table for Milling](https://i.ytimg.com/vi/qIvcTz7NWII/default.jpg)