Homemade Anvil Made From a Wheel?
Click here to see the products used in this video
https://amzn.to/2X5oVIR
This video shows how we made two anvils from a solid steel wheel. We started with a scrapyard steel wheel from a large industrial machine, had it cut then machined the surface, welded bases on and heat treated them. This wheel was hardened around the outer diameter. I believe its made of 4140. I usually do most of the work but in this video my sons did all of the work. They will be appearing more in our future videos. This project is the start of putting a blacksmith area in our shop.
Видео Homemade Anvil Made From a Wheel? канала Greenridge Metal Works
https://amzn.to/2X5oVIR
This video shows how we made two anvils from a solid steel wheel. We started with a scrapyard steel wheel from a large industrial machine, had it cut then machined the surface, welded bases on and heat treated them. This wheel was hardened around the outer diameter. I believe its made of 4140. I usually do most of the work but in this video my sons did all of the work. They will be appearing more in our future videos. This project is the start of putting a blacksmith area in our shop.
Видео Homemade Anvil Made From a Wheel? канала Greenridge Metal Works
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
I turn a Railroad Track into an Anvil! Simple & Easy DIY - Homemade AnvilComo se hace un yunque a partir de un rail (construction of an anvil with a rail)1890's Blacksmith Forge ~ RESTORATION & REPAIRСЮРПРИЗ НА СВАЛКЕ! НАКОВАЛЬНЯ | Зачем люди это выбрасывают?BIGORNA - AnvilDIY anvil - dual railForget An Anvil! Get yourself an ASO!Broken Bench Vise ~ RESTORATION & REPAIRBuilding a Mobile Anvil Stand - BlacksmithingHomemade Anvil with a Hardy Hole - plus Hardy ToolsShop Made Blacksmiths Swage Block Anvil Combo!СУВЕНИР ИЗ РЕЛЬСА | НАКОВАЛЬНЯbigorna caseira por menos de R$ 200,00 | canal fazer em casaI turn a Old Iron Plate into an Anvil - Homemade Iron AnvilBlacksmithing anvils and anvil substitutesThe Abandoned Anvil ~ RESTORATION, REPAIR, & DISCOVERYMaking a 100kg Steel Anvil - The Drag and Cores using K-CAST SandFabri-Cobbling Tools for the ANVIL ~ Blacksmithing Tools from Random Stuff Around the ShopHow to make an Anvil from old Railroad TrackModified Cast Iron Anvil- Yes, it can be done