Isuzu MU-X/D-MAX Safari Snorkel Installation || How to install a snorkel
G'day Guys and Gals!
In this video i show you all the steps involved in fitting a Safari Snorkel to your Isuzu MU-X or D-MAX. It is very similar installation however for most 4wd's and the instructions supplied with the safari snorkel will specify all the tools and sizes of holes etc. The snorkel will also come with all templates necessary for the installation.
You will need a few parts and tools to be able to carry out this job they are -
-Stepper drill bit that goes up to 16mm
-hole saw bit 111mm
-drill
-die grinder and die bits
-sandpaper
-biscuit wheel
-touch up pain - same colour as car
-round file
-assorted ratchets, sockets and spanners
-trim/plastic rivet removal tool
-tape
-marker pen
-screwdrivers
-Sika flex sealant
They are the main tools and extra parts you will require : )
The installation begins by removing the Isuzu MU-X air box, inner guard liner and intake pipe that sits inside the inner guard. Double check the template aligns perfectly with the snorkel.
You then need to tape up the guard and put the template onto the guard. Using a marker pen, mark out your holes and remove the template.
Then using the stepper drill, drill out the holes to 16mm and a pilot hole for your hole saw hole.
Use the 111mm hole saw to drill out the large snorkel intake hole and then de-burr all of your holes. Test fit the snorkel with the bolts in and tape and mark your A pillar trim mount. Then drill out your A pillar trim mount holes to 8mm and de-burr holes.
You need to then enlarge the hole on the inner guard where the standard intake pipe goes through. Using the template supplied mark out and die grind out the hole to the larger diameter and test fit the intake pipe. Clean down all metal swarf and use your touch up paint to seal up all of the bare metal.
While the paint is drying you need to modify the intake pipe into the airbox. Remove the pre-spinner pipe and disassemble. Remove the ridge on the pipe and sand completely flat and then reassemble using sika flex sealant to make the intake to the airbox completely water tight. Seal up the drain bungs on the bottom of the airbox with sika flex as well.
Now its time to fit the snorkel, intake pipe and airbox back to the vehicle and double check everything is water tight. Now just chuck your inner guard liner back in and you can stand back and admire your awesome handy work!
Thanks alot for watching guys! If you enjoyed this video and would like to see more videos like this. Please like and Subscribe to my channel : )
LowRangeNick -
Instagram - https://www.instagram.com/Lowrangenick/
Facebook - https://www.facebook.com/Lowrangenick/
Cheers guys! :D :D :D
The awesome background music is thanks to -
Still Back by ZAYFALL https://soundcloud.com/zayfallmusic
Creative Commons — Attribution 3.0 Unported — CC BY 3.0
http://creativecommons.org/licenses/b...
Music promoted by Audio Library https://youtu.be/bkRr409ghOQ
Summer Vibes by Simon More https://soundcloud.com/user-73416670
Creative Commons — Attribution 3.0 Unported — CC BY 3.0
http://creativecommons.org/licenses/b...
Music promoted by Audio Library https://youtu.be/FTUkaPnYdLU
Rain (ft. Enine) by JayJen Music https://soundcloud.com/jayjenmusic
Creative Commons — Attribution 3.0 Unported — CC BY 3.0
http://creativecommons.org/licenses/b...
Music promoted by Audio Library https://youtu.be/9WNyE3_MkoM
Feel by LiQWYD https://soundcloud.com/liqwyd
Creative Commons — Attribution 3.0 Unported — CC BY 3.0
http://creativecommons.org/licenses/b...
Music promoted by Audio Library https://youtu.be/iKYGTTaj9oo
All Night by Ikson https://soundcloud.com/ikson/
Music promoted by Audio Library https://youtu.be/bE2rrcUKnok
Endless Summer by extenz https://soundcloud.com/extenz
Creative Commons — Attribution 3.0 Unported — CC BY 3.0
http://creativecommons.org/licenses/b...
Music promoted by Audio Library https://youtu.be/dH8sbGnmfZo
Landscape lover by Vendredi https://soundcloud.com/vendrediduo
Creative Commons — Attribution 3.0 Unported — CC BY 3.0
http://creativecommons.org/licenses/b...
Music promoted by Audio Library https://youtu.be/kya1x-_zfeE
Видео Isuzu MU-X/D-MAX Safari Snorkel Installation || How to install a snorkel канала LowRangeNick
In this video i show you all the steps involved in fitting a Safari Snorkel to your Isuzu MU-X or D-MAX. It is very similar installation however for most 4wd's and the instructions supplied with the safari snorkel will specify all the tools and sizes of holes etc. The snorkel will also come with all templates necessary for the installation.
You will need a few parts and tools to be able to carry out this job they are -
-Stepper drill bit that goes up to 16mm
-hole saw bit 111mm
-drill
-die grinder and die bits
-sandpaper
-biscuit wheel
-touch up pain - same colour as car
-round file
-assorted ratchets, sockets and spanners
-trim/plastic rivet removal tool
-tape
-marker pen
-screwdrivers
-Sika flex sealant
They are the main tools and extra parts you will require : )
The installation begins by removing the Isuzu MU-X air box, inner guard liner and intake pipe that sits inside the inner guard. Double check the template aligns perfectly with the snorkel.
You then need to tape up the guard and put the template onto the guard. Using a marker pen, mark out your holes and remove the template.
Then using the stepper drill, drill out the holes to 16mm and a pilot hole for your hole saw hole.
Use the 111mm hole saw to drill out the large snorkel intake hole and then de-burr all of your holes. Test fit the snorkel with the bolts in and tape and mark your A pillar trim mount. Then drill out your A pillar trim mount holes to 8mm and de-burr holes.
You need to then enlarge the hole on the inner guard where the standard intake pipe goes through. Using the template supplied mark out and die grind out the hole to the larger diameter and test fit the intake pipe. Clean down all metal swarf and use your touch up paint to seal up all of the bare metal.
While the paint is drying you need to modify the intake pipe into the airbox. Remove the pre-spinner pipe and disassemble. Remove the ridge on the pipe and sand completely flat and then reassemble using sika flex sealant to make the intake to the airbox completely water tight. Seal up the drain bungs on the bottom of the airbox with sika flex as well.
Now its time to fit the snorkel, intake pipe and airbox back to the vehicle and double check everything is water tight. Now just chuck your inner guard liner back in and you can stand back and admire your awesome handy work!
Thanks alot for watching guys! If you enjoyed this video and would like to see more videos like this. Please like and Subscribe to my channel : )
LowRangeNick -
Instagram - https://www.instagram.com/Lowrangenick/
Facebook - https://www.facebook.com/Lowrangenick/
Cheers guys! :D :D :D
The awesome background music is thanks to -
Still Back by ZAYFALL https://soundcloud.com/zayfallmusic
Creative Commons — Attribution 3.0 Unported — CC BY 3.0
http://creativecommons.org/licenses/b...
Music promoted by Audio Library https://youtu.be/bkRr409ghOQ
Summer Vibes by Simon More https://soundcloud.com/user-73416670
Creative Commons — Attribution 3.0 Unported — CC BY 3.0
http://creativecommons.org/licenses/b...
Music promoted by Audio Library https://youtu.be/FTUkaPnYdLU
Rain (ft. Enine) by JayJen Music https://soundcloud.com/jayjenmusic
Creative Commons — Attribution 3.0 Unported — CC BY 3.0
http://creativecommons.org/licenses/b...
Music promoted by Audio Library https://youtu.be/9WNyE3_MkoM
Feel by LiQWYD https://soundcloud.com/liqwyd
Creative Commons — Attribution 3.0 Unported — CC BY 3.0
http://creativecommons.org/licenses/b...
Music promoted by Audio Library https://youtu.be/iKYGTTaj9oo
All Night by Ikson https://soundcloud.com/ikson/
Music promoted by Audio Library https://youtu.be/bE2rrcUKnok
Endless Summer by extenz https://soundcloud.com/extenz
Creative Commons — Attribution 3.0 Unported — CC BY 3.0
http://creativecommons.org/licenses/b...
Music promoted by Audio Library https://youtu.be/dH8sbGnmfZo
Landscape lover by Vendredi https://soundcloud.com/vendrediduo
Creative Commons — Attribution 3.0 Unported — CC BY 3.0
http://creativecommons.org/licenses/b...
Music promoted by Audio Library https://youtu.be/kya1x-_zfeE
Видео Isuzu MU-X/D-MAX Safari Snorkel Installation || How to install a snorkel канала LowRangeNick
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
How To Maintain & Service Your 4X4 Vehicle - Isuzu MU-X Service & MaintenanceIsuzu MU-X Suspension Lift Kit Installation - How to install a lift kit in your IFS 4x4Snorkel install // Safari 4x4 Engineering // MQ TRITON // ARBiDRIVE Throttle Controller || Unboxing || Installation || First Drive ||Stainless Steel Snorkel Install | NP300 Navara | + Promo Code #ShedSessions #NP300Turbo Diesel Tune Up for Under $100 - Better Economy + Better ResponseIsuzu MU-X Tyres and Rims - Fitting Fuel Offroad Rims and Atturo Trailblade M/TsBREATHING EASIER with a JMAX Engineering Snorkel - TOYOTA HILUX N70 INSTALLIntercooler Piping Upgrade || Rubber to Hard Pipes || Isuzu Mu-x / D-maxHOW TO FIT GGR FORD RANGER T7 SNORKEL KITHow to re-grease your front wheel bearings - Isuzu MU-X/D-MAX DIY TutorialSafari Snorkel Install – 105 LandCruiser2021 ISUZU D-MAX vs OLD - is it REALLY better? Dyno runs, Suspension pulled apart - Experts tell allIsuzu MU-X Tow bar Install - How to install a Tow BarIsuzu MU-X Walk-around - 1 Year & 50,000km Review30mm Diff Drop Installation || Isuzu Mu-x + D-maxIsuzu MU-X Provent 200 Catch Can - Draining my Catch Can after 9000 kmInstalling a snorkel on a Land Cruiser (FJ80) // How-To | I Like To Make StuffIncrease your 4wd performance with these 4 easy power upgradesIsuzu Mu-X & D-Max AFN Bull Bar Installation - DIY