Understanding Mixing Cups : Mix Ratios
In this segment Kyle breaks down how to read a mixing cup and get the proper ratio every time. These cups can be little confusing so we hope this will help the understanding on how to portion out your products. This applies to most liquid products. Paint, Resin, Epoxy Ex.
STEP 1. Figure out how much total product you want to have after all of the components have been added to the cup.(example 12oz)
STEP 2. Spin the cup around and line up the final number that appears in the correct ratio with the 12oz mark on the other side of the cup. (final number was 3 in video)
STEP 3. Pour in the main solution to the first number in that series.
Step 4. Pour the next part of the solution up to the second level of the same number (3)
STEP 5. Continue process if more than just 2 part solution (2:1:1)
Hope this helps!
all products are available at Fiberglassflorida.com
Видео Understanding Mixing Cups : Mix Ratios канала Fiberglass Florida
STEP 1. Figure out how much total product you want to have after all of the components have been added to the cup.(example 12oz)
STEP 2. Spin the cup around and line up the final number that appears in the correct ratio with the 12oz mark on the other side of the cup. (final number was 3 in video)
STEP 3. Pour in the main solution to the first number in that series.
Step 4. Pour the next part of the solution up to the second level of the same number (3)
STEP 5. Continue process if more than just 2 part solution (2:1:1)
Hope this helps!
all products are available at Fiberglassflorida.com
Видео Understanding Mixing Cups : Mix Ratios канала Fiberglass Florida
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Fiberglass Florida : Stuart, Florida](https://i.ytimg.com/vi/rdRKRXayt8w/default.jpg)
![Orion surfboards : Behind the scenes](https://i.ytimg.com/vi/EX-YcYM523o/default.jpg)
![The Awlwood system: learning the different primers /prep / different coats](https://i.ytimg.com/vi/fy-FKhs-JaE/default.jpg)
![Live edge cedar table with ghosted epoxy voids : Cedar Hollow](https://i.ytimg.com/vi/lKKXMAVANeU/default.jpg)
![3M respirators : High quality gear at wholesale prices](https://i.ytimg.com/vi/ElY05SiPyM4/default.jpg)
![55 Gallon Epoxy Bar w/ 350 yr old Pecky Cypress inlays](https://i.ytimg.com/vi/kJp8mmTpXXc/default.jpg)
![Awlgrip VS. Awlcraft : Mix, prep & spray](https://i.ytimg.com/vi/QG0RVgyr0sY/default.jpg)
![Shaping surfboard rails w/ Allen White : How to shape a surfboard blank](https://i.ytimg.com/vi/LbA8_jyhJpY/default.jpg)
![Cloth Inlay on a surfboard : Fabric Inlay](https://i.ytimg.com/vi/JeVf8W4ELuE/default.jpg)
![Roll & Tip Awlgrip : Applying Non Skid over wet paint](https://i.ytimg.com/vi/2SS4PKfli4k/default.jpg)
![How to gloss a surfboard : applying the final gloss coat](https://i.ytimg.com/vi/jqLhbuqbANY/default.jpg)
![3M Accuspray system : understand the PPS system : spraying non-skid Awlgrip](https://i.ytimg.com/vi/PeyzAzdlfZQ/default.jpg)
![Polishing a surfboard : how to polish a surfboard](https://i.ytimg.com/vi/Ukzj_ngsjlo/default.jpg)
![Futures one shot install kit : Routing & Installing fin boxes with resin](https://i.ytimg.com/vi/PeacX9SBMN8/default.jpg)
![Glassing a Surfboard : Surfboard Lamination](https://i.ytimg.com/vi/0vkAU5l7bNM/default.jpg)
![Futures ILT One Pass Installation Kit : HOW TO](https://i.ytimg.com/vi/hUcaI-2XIko/default.jpg)
![How to Hot Coat : Epoxy hot coating a surfboard](https://i.ytimg.com/vi/feukUZZppEE/default.jpg)
![How to use Awlgrip products : Mix Ratios, Primers, Prep , Application](https://i.ytimg.com/vi/rfovRmxWrjU/default.jpg)
![Resin pin lines on a surfboard : how to get perfect pin lines](https://i.ytimg.com/vi/sFN2S5CTc6o/default.jpg)
![Glassing a Surfboard Deck : Sanding the cut laps and laminating the top of a surfboard](https://i.ytimg.com/vi/p6FZVGwLMNQ/default.jpg)
![Routing FCS 2 Fin boxes : Installation](https://i.ytimg.com/vi/JGtvvpZ37Zg/default.jpg)