How to reverse single phase motor direction

Single Phase Motor Direction Change
To reverse rotation on a single phase capacitor start motor, you will need to reverse the polarity of the starter winding. This will cause the magnetic field to change directions, and the motor will follow. In order to achieve this, you can swap the connections on either end of the winding. Always reverse the wires that lead to the starter winding.

Note that most motors, if still labelled with manufacturer instructions, will indicate that they are non-reversible. If this is the case, it's likely because the wires you would need to access are housed within the motor. If your unit has this warning, it's easiest not to proceed. If, however, your motor is reversible, you might notice that it provides instructions for reversal. Usually, these instructions will tell you which wires to change. For instance, some units might have you switch the red and green leads in the terminal box at the end of the casing. In other instances, the blue and yellow wires may need to be swapped. The colour of the wires is highly individual and depends upon the brand and model of motor you have. It's best to read the instructions provided by the manufacturer before proceeding.
watch more videos here
Direct online part 1 https://youtu.be/lfcXpTplTZM
Direct online part 2 https://youtu.be/-9mV3XOZ2HA
Selfholding circuit https://youtu.be/4kEaUvvAgtE
Selector switch https://youtu.be/vB3v6-TzqM4
Star delta starter https://youtu.be/we7MxJ0fjDM
Float switch https://youtu.be/L-pIQlVpdF0
Relay https://youtu.be/-pj298MVpAs
Automatic changeover switch https://youtu.be/VDdbijxTGfA
SUBSCRIBE TO THE CHUNNEL

contact me here
electreca.workshop@gmail.com
follow me on Twitter https://twitter.com/DavidSsengendo
like my Facebook page https://www.facebook.com/electerca
Visit my blog https://electrecasolutions.com/blog/

Видео How to reverse single phase motor direction канала ELECTRECA