RESTORATION OF A RUSTY NON-WORKING VINTAGE OMEGA SEAMASTER 60 WATCH - PART 2 - 1969 CIRCA

Make sure to watch the first half before watching this half. Link to Part 1: https://youtu.be/_Rgjtiqarn0

If you find this video helpful, can always do an one time support by buying me a coffee: https://www.buymeacoffee.com/omegaenthusiast
Support me on Patreon: https://www.patreon.com/omegaenthusiast
website: http://www.omegaenthusiastltd.com
Instagram: https://www.instagram.com/omega_enthusiast

This will be my first video on restoration. In this video, I'll be restoring a non-working rusted 1969 vintage Omega Seamaster watch. The beginning process is always very dirty. Aside, from stripping down the case and removing the rust, I will have to do the same for this Omega caliber 563 automatic movement with 17 jewels.

Part 1: https://youtu.be/_Rgjtiqarn0
Will do my best to manually clean and remove as much rust as I can. All parts can be save beside the broken stem which will definitely require replacement. A proper service will require the replacement of old case back and crown gaskets as well. Crystal is to be thoroughly examine for cracks or else will require new replacement. Watch me save the rusty calendar disc on this watch. The mainspring of the watch should be taken out and thoroughly examine as well.

Part 2:
Time to assemble everything back to one piece. Watch me save the crown and remove the melted crown gasket. It will cover how I properly install the crystal and make the bezel rotates once again. Cleaning the dial and polishing the scratched crystal are highly important as you want to make the watch presentable.

Hope you guys will enjoy this video as it took me a long time to complete. Support the channel by hitting on that thumbs up button below the video. Don't forget to subscribe and hit on that notification bell so you will be notified whenever I upload a new video for you guys.
Comment below if you enjoy this video and would like me to produce more in the future.

#Restoration
#WatchRestoration
#OmegaSeamaster
#Omegawatch
#Vintagewatch

Here are a list of tools that I used in this video:

Bergeon case back opening ball: https://amzn.to/2XojK4W
Bergeon knife: https://amzn.to/2D6GPSV
Bergeon hand setting tool set: https://amzn.to/2PkKQFH
Bergeon Oilers: https://amzn.to/33kYOj6
Bergeon Rodico for cleaning: https://amzn.to/2PlRWd4
Bergeon hands removing tool: https://amzn.to/39UmQms
Bergeon movement holder: https://amzn.to/2XrcAga
Bergeon screwdriver set: https://amzn.to/3fk1O1y
Bergeon screwdriver Purple 1.60mm diameter: https://amzn.to/30q0YMl
Bergeon screwdriver Black 1.00mm diameter: https://amzn.to/3kb1ju8
Bergeon screwdriver Yellow .80mm diameter: https://amzn.to/3i5pZm5
Bergeon screwdriver Red 1.20mm diameter: https://amzn.to/3kiCM6K
Bergeon dust blower: https://amzn.to/31jqna1
Crystal press: https://amzn.to/3i0MHfd
Toothpicks: IN YOUR KITCHEN :-)

Видео RESTORATION OF A RUSTY NON-WORKING VINTAGE OMEGA SEAMASTER 60 WATCH - PART 2 - 1969 CIRCA канала Omega Enthusiast