A pair of Hornets at Melton and District Model Club

Red & White Hornet built and flown by Colin Henderson

Hornet
Motor - Racestar BR2207s, 2500kv "Fire Edition"
Esc -30amp Turnigy plush
Prop - 6 x 4 E
Limited to 29amps @320w
3s 1500mah nanotech/zippy compact.

Yellow Hornet built and flown by Phil Curtis

Construction foam with balsa and carbon strengthening, covered in heat shrink, battery 2200mah 3S, 30amp Turnigy ESC, motor Prop Drive 28-36 2200KV,
Servos Corona CS-939mg analog. Prop 7x6 pulling 28 amps max, 247 Watts. All rates reduced from drawing recommendations. Weight 1.4lb
Hornet is a 1/2a pylon/sports model, built from plan from Outerzone, original from 1976 was on a 0.49/0.51 (0.8cc)
37 inch span. 3 chanel, motor, aileron, elevator
https://mdmc.bmfa.org

Видео A pair of Hornets at Melton and District Model Club канала Tim Coppin RC Flying