How to put up your Bulhawk pop up gazebo

This instruction video will show you how to set up your Bulhawk pop-up gazebo. Assembly is quick and easy when following our 'how to' visual.

You can see more information regarding Bulhawk gazebos at www.bulhawk.co.uk

A step by step guide is also provided below:

1. Carefully remove the gazebo frame from its packaging
2. Take out the frame from its carry bag
3. Position frame in the centre of the desired location and extend to arm's length.
4. Prepare the roof cover and place this over the frame.
5. Velcro each corner of the roof to the upper part of the leg. Ensure this process is completed for all four legs before moving on.
6. Locate centre of the roof and position on top of centre peak pole.
7. Expand the frame by opening up cross bar sections and stepping backward.
8. Push the plastic section up until it clicks into place. Repeat this process on all four legs before moving on.
9. Pull roof corners down tightly.
10. Use the push-button between the upper and lower leg to increase the height of the gazebo.
11. Attach the four canopy straps on the underside of the gazebo on each side.
12. If sidewalls are provided, these are fitted by connecting the top of the sidewall to the velcro attachment on the underside of the roof.
13. Connect each sidewall to the other using the same method as above.
14. Connect the sidewalls to the gazebo legs using the small velcro straps.
15. Your gazebo is complete and ready to use.

Видео How to put up your Bulhawk pop up gazebo канала Bulhawk