Homers/Tevo - Tarantula Pro - 3D Printer - Unbox & Setup

HOMERS-TEVO Tarantula Pro 3D Printer Kit
Amazon: https://geni.us/hZYhu
Official: https://bit.ly/3m9Y7jq
https://homers3dprinter.com
Recommended: http://geni.us/JustVlads

Build Volume
The TEVO Tarantula Pro has a moderate build volume of 235 mm x 235 mm x 250 mm. This conforms to the standard size to build volume ratio for this category of printers.

Print Speed
This 3D printer has an impressive printing speed, where maximum speed can reach up to 60 mms to 150 mms. Thus, you can get your prints ready at an amazing speed.

Axis Movement
The TEVO Tarantula Pro has a volcano hot end. In addition, the XZ-Cartesian frame allows you to print easily to every corner of the model. There is a strain of relief for the bed moving on the Y-axis. This gives the printer more stability during the print and ultimately increase the quality of the print.

The Firmware and Software
The firmware fitted to the TEVO Tarantula Pro is Marlin. The MKS Gen L motherboard provides rugged features to the users.The printer comes with a copy of the Repetier on its SD card. But if you want to, you can change the software you want to use with the printer.

Materials Supported
The printer supports various materials for printing. This means that you can work with PLA, Flexible, PLA, Wood, PVA and HIPS materials. Subsequently, this is an amazing feature for a pointer of this category that can handle multiple materials under one roof.

Print Speed: 60mms-150mms
Build volume: 235 x 235 x 250 mm - 9.25 x 9.25 x 9.84 inch
Layer resolution: 0.05mm-0.35mm
Heat bed type: MK3 Heat Bed
Supported materials: PLA, Flexible PLA, Wood, PVA, HIPS
Extruder: Volcano
Power Supply: 24V 8.5A 200W-FCC ROSH CE
Control board: MKS GenL V1.0 ,MKS MINI12864 LCD Display
Travel speed : 250mms
Print surface : PC Platform
Filament diameter : 1.75mm
Print technology : FFF Fused Filament Fabrication
Feeder type : Tevo Titan Bowden type
XYZ resolution: 0.05mm, 0.05mm, 0.1mm
Nozzle temperature : 180℃ – 240℃
Nozzle heat up time : 3 minutes; 0-240°C

Build plate heat up time : 4 minutes; 0-70°C
Operating sound : 60dBA
Input-Output : AC 110V-240V;50-60 Hz; DC 24V ,8.5A
Power supply : 200W，FCC, ROSH, CE Certification etc .
Product weight :7.5kg Approximately
Shipping weight : 8.1 kg Approximately
Support for slicing software: Simplify3D, Cura, Slic3r, Repetier EasyPrint 3D, CraftWare, TinkerCAD
Assembly model: DIY KITS Prebuilt Mainboard Wires, rest of kits DIY NOT PREASEMBLED
As an Amazon Associate I earn from qualifying purchases
My website: https://www.justvlads.com/

Видео Homers/Tevo - Tarantula Pro - 3D Printer - Unbox & Setup канала Just Vlad