Acrorip V10.3 RIP software with Epson EcoTank ET-8500 / ET-8550

To buy Acrorip V10.3, locate an authorized reseller at www.acrorip.com

Acrorip V10.3 released July 2021 works with the Epson EcoTank ET-8500 and ET-8550. This video covers some pointers in regards to using the RIP software with these printers, as well as some nuances that you would want to be aware of and consider when deciding to use these printers for specialty printing such as DTG, DTF or other printing technologies that need white ink or RIP software. Specifically and of important note:

- The ET-8500 is an A4 size printer. The page size in Acrorip needs to be set to A4 dimensions, otherwise the image will print in the wrong location. When using the ET-8550, you also need to set the correct page size (whether A4 sheets or A3 sheets are used). Incidentally, this is also required for the XP-15000.
- Rear Tray setting needs to be selected
- With AcroRip V10.3 you can set custom ink channels, meaning you can decide in which channel you want to put white ink, and you can even turn off certain channels (such as if a channel is blocked)
- Printer modifications such as roller removal, ink sensors (that affect if the printer will sense film) etc are not supported by the RIP supplier, those modifications are the responsibility of the printer user themselves

Видео Acrorip V10.3 RIP software with Epson EcoTank ET-8500 / ET-8550 канала easygroup