Beginners Learn to repair One concrete step in 5 min 4k video | Concrete and Cement Work
Benjamin Moore paint contacted Dependable concrete to replace a hazardous step. In this video I demonstrate how we performed this job.
Our website: www.dependableconcrete.com
After demoing the concrete, we set the form. This step will have a bull nose front.p
Will use 4000 PSI FIBER integrated Concrete will use 4000 PSI fiber integrated concrete
To prevent lost revenue., we installed a ramp for Benjamin Moore's clients.
The forms are removed once the cast concrete can support itself.
We use Type 1 Portland cement for the finish coat. It's recommended to match the finish coat to the cement type used in the concrete.
Before smoothing or slicking the cement finish, its important to begin with clean and wet tools.
This red grout sponge is the ideal tool for finishing the facial of a concrete step. See link below for sponge.
A professionally finished step will have sharpe corners and edges.
You want to continuously fine tune your finish.
Remember, timing is key . Keep in mind that while working on an area, you are allowing another area to dry.
A leveled and slick curve in the bull nose shows a finishers level in skill and craftsmanship.
For our finish coat We use a 1 to 2 ratio mix. One part Portland cement to two parts bar sand
Our corners are sharp, plumbed and leveled.
Novices struggle to finish sharp corners
You can do work of this quality now that I have shown you how to do this job. Remember it's important not to rush the process and to efficiently use and manage dry time.
The following links will help you find the tools you will need to accomplish this job:
1. bullnose tool
2. 4" trowel
3. hawk
4. horse hair brush
https://nolenbuildingmaterials.com/
https://marshalltown.com/
Cement and sand for 1:2 mix
Cement:
http://www.homedepot.com/catalog/productImages/1000/65/65d7e5eb-fc8e-4ef8-a8f3-5a22b4086075_1000.jpg
Sand:
http://www.homedepot.com/catalog/productImages/1000/2c/2c05227a-bb1b-4841-b0a3-11fa0600812a_1000.jpg
Red grout Sponge:
http://www.homedepot.com/catalog/productImages/1000/f1/f164012c-7b8b-456a-a342-43865bdbdab6_1000.jpg
Leave a comment if you have a question or contact our office at 215-821-9779
Видео Beginners Learn to repair One concrete step in 5 min 4k video | Concrete and Cement Work канала Dependable Concrete Contractor
Our website: www.dependableconcrete.com
After demoing the concrete, we set the form. This step will have a bull nose front.p
Will use 4000 PSI FIBER integrated Concrete will use 4000 PSI fiber integrated concrete
To prevent lost revenue., we installed a ramp for Benjamin Moore's clients.
The forms are removed once the cast concrete can support itself.
We use Type 1 Portland cement for the finish coat. It's recommended to match the finish coat to the cement type used in the concrete.
Before smoothing or slicking the cement finish, its important to begin with clean and wet tools.
This red grout sponge is the ideal tool for finishing the facial of a concrete step. See link below for sponge.
A professionally finished step will have sharpe corners and edges.
You want to continuously fine tune your finish.
Remember, timing is key . Keep in mind that while working on an area, you are allowing another area to dry.
A leveled and slick curve in the bull nose shows a finishers level in skill and craftsmanship.
For our finish coat We use a 1 to 2 ratio mix. One part Portland cement to two parts bar sand
Our corners are sharp, plumbed and leveled.
Novices struggle to finish sharp corners
You can do work of this quality now that I have shown you how to do this job. Remember it's important not to rush the process and to efficiently use and manage dry time.
The following links will help you find the tools you will need to accomplish this job:
1. bullnose tool
2. 4" trowel
3. hawk
4. horse hair brush
https://nolenbuildingmaterials.com/
https://marshalltown.com/
Cement and sand for 1:2 mix
Cement:
http://www.homedepot.com/catalog/productImages/1000/65/65d7e5eb-fc8e-4ef8-a8f3-5a22b4086075_1000.jpg
Sand:
http://www.homedepot.com/catalog/productImages/1000/2c/2c05227a-bb1b-4841-b0a3-11fa0600812a_1000.jpg
Red grout Sponge:
http://www.homedepot.com/catalog/productImages/1000/f1/f164012c-7b8b-456a-a342-43865bdbdab6_1000.jpg
Leave a comment if you have a question or contact our office at 215-821-9779
Видео Beginners Learn to repair One concrete step in 5 min 4k video | Concrete and Cement Work канала Dependable Concrete Contractor
Показать
Комментарии отсутствуют
Информация о видео
29 мая 2017 г. 11:36:21
00:05:35
Другие видео канала
Excellent Technical Construction Window Foot With Reinforced Concrete And Cement & Sand OrnamentBricklaying - Small StepRound Pipe Design || Pipes Farma Tips || Raj m BhadrakAmazing Techniques Fastest Construction Concrete Finishing machine WorkingHow To Repair Old Concrete| Project From Beginning To End | DIY Concrete Resurfacing Repair TutorialBricklaying - Brick Step DesignConcrete Step Form Liners - Pouring Concrete StepsConcrete Stair Restoration and Overlay - One day repair!How to Build a Block wall with Poured in Place Concrete wall Caps (PT 2)how to form pour and finish a concrete patio and steps [pt 2DIY Laying a Concrete SlabSmart Techniques Construction Skills Beautiful Rendering Sand And Cement on The ConcreteCement Step Repair in One Day -- by Home Repair TutorCONCRETE STEPS REPAIR (Part 1) Mike HaduckHow to Make a Concrete Sidewalk - Do It YourselfHow to make cement concrete molds Precast - skills to construction beautiful fences easilyHow to easily Resurface Steps | Concrete and Cement work ContractorAmazing Techniques Construction Rendering Sand and Cement For Brick StepsHow To Build Home Foot Detail With Cement And SandHow To Build Cinder Block Steps