Proper way to Install backer board in Tub area

Proper way to Install a cement backer board in Tub area, is not sit on top of the tub flange. When the bathtub is installed measure should be taken to insure that the backer board for the tile can be installed correctly to be in front of the tub flange and go down to the tub deck. Refer to these TCNA methods B412 specifically for cement board, and 3:53 B411, B440, B419, B425, B430, for other backing types. Before the cement board, or Hardie Backer board, or whatever tile backer you decide to use, if needed the studs should be shimmed or furred out so that the tile backer can be positioned to be placed on the tub deck so that the flange does not "Kick" out the bottom of the tile backer and can remain in a flat plane. A small gap should be left where the backer board meets the tub and it should be sealed with silicone or the appropriate sealer for the tile backer board that you are installing. Waterproofing, or vapor barriers or other systems to manage water is another aspect of the installation of the tile assembly in a wet area, I am only referring to the proper placement of the board in relation to the tub in this video.
All tile installed by Sal DiBlasi, Elite-tile Company, in the Boston North Shore area. This video contains affiliate links, which means I will receive a small commission if you click on the product link.
#tile #transformthetrade #howtotile #installingtile #howtoinstalltile #Schlutersystems

☕ Buy me a coffee ☕
https://www.buymeacoffee.com/saldibs2

🙂 This is my Amazon Store 🙂
https://www.amazon.com/shop/saldiblasi

💲1 PDF Floor installation guidelineshttps://sowl.co/s/wWd2d 💲1
Channel Store https://www.youtube.com/channel/UCWpu9UZ6aiRTaMuuV8-C0pQ/store

👍 Patreon https://www.patreon.com/saldiblasi 👍
YouTube Channel https://www.youtube.com/user/saldibs

Facebook
https://www.facebook.com/pages/Elite-Tile-Company/56681633342

Website
http://www.elitetileco.com/

Twitter
https://twitter.com/saldiblasi1

Instagram
https://www.instagram.com/saldiblasi1/

National Tile Contractors Association
https://tile-assn.site-ym.com/

Some of my favorite Tools
Grout Float https://amzn.to/2tdEpN2
Rubbing Stone https://amzn.to/2QrgRfh
Notched Trowel 1/4 x 1/4 x 1/4 inch https://amzn.to/36bq5mQ
Notched Trowel 1/2 x 1/2 x 1/2-Inch https://amzn.to/2Q5e90g
Notched Trowel 1/4 x 3/8 x 1/4-Inch https://amzn.to/39j1caB
Super Dust Collector – WaleTale https://amzn.to/2MDuVkK
Black Nitrile Gloves - 6 mil https://amzn.to/2SJQ6FZ
Margin Trowel https://amzn.to/352MYHx
Mortar Mixer https://amzn.to/2ZxYqtF
4in Sandpaper for Stone Polishing https://amzn.to/2ZB2skT
Polishing Rubber Backing Pad https://amzn.to/2srikdy
Montolit 63P3 24 Inch Tile Cutter https://amzn.to/2MDoFtl
DEWALT Wet Tile Saw https://amzn.to/2QqpO8O
Opt into NTCA’s VIP Text Messaging program for training opportunities.
Text “NTCA” to 31996 or Visit https://widget.smsinfo.io/v2/ae58812ba684c1dc65550d3349dbc2e6
For Industry Professionals only

Видео Proper way to Install backer board in Tub area канала Sal DiBlasi