Frosted Pinecones. resin, lathe turned. Support OURRESCUE.ORG purchase: O.U.R. at ArtForOUR.org
This was a double resin pour first with clear and then with frosted look resin with pinecones as filler. Kind of a Christmas vibe going on with this one. Hand turned on the lathe.
As an Amazon Associate I earn from qualifying purchases. And every penny earned is donated to Operation Underground Railroad at OURRESCUE.ORG.
Here are my commonly used tools/equipment if you'd like to try them out....
- Lathe: (https://amzn.to/3orYsOy) this lathe is freaking amazing, very well built, solid, strong, variable speed, 110 or 220 volt. I couldn't have designed it better.
- Lathe tools: (https://amzn.to/3agd3ay) carbide tip, (https://amzn.to/3t5iMsA) great beginner set
- File Sander: (https://amzn.to/36o3hlE), this is the cheapest and highest quality I've found. Fantastic for those hard to get to sanding projects.
- Angle Grinder: (https://amzn.to/36lgewG), one of my most indispensable tools, (https://amzn.to/3iXtNHW) the flat head helps get into tight spaces, carving and sanding disks are a life saver.
- Grinder Carving Disk: (https://amzn.to/39oWqKG), this is a really great disk for roughing out medium sized projects
- Grinder Sanding Disks: (https://amzn.to/3cj91Rv), fantastic for sanding and minor-moderate shaping stages
- Round Sanding System: (https://amzn.to/3r11N8Q) sleeves go around an inflatable ball (https://amzn.to/2KVCUvW )or make your own foam ball, attaches to a drill, great for tight corners.
- Palm Sander: (https://amzn.to/3r1mJg8), the most important sanding tool, used on almost every job. I like the size of the sand paper for both this and on the lathe by hand.
- Chain Saw: (https://amzn.to/2MbWNj2), has worked well for years, I also bought this electric one (https://amzn.to/3qZOqpp) for the quieter in the garage projects
- Oscillating Tool: (https://amzn.to/3puK4q1) great for cutting and sanding sharp corners and tight spots.
- Super Glue: (https://amzn.to/3pFg5vT) thin and runny, perfect for stabilizing bark or other unstable wood.
- Resin: (https://amzn.to/3t7WSVo), one of the cheaper but higher quality, does it all resins. Great results.
- Pigments: https://amzn.to/3sYC5ng, great quality for resin
- Pressure Pot: (https://amzn.to/3tfp1u2) 5 gallon for the big resin projects to get rid of bubbles, or (https://amzn.to/3pwX0M8) for the smaller average jobs 2.5 gallon, both need minor modifications to work.
- Protection: (https://amzn.to/39t3lm0), best face shield yet for carving and lathe work
My goal is to pair my love for medicine/surgery, video, photography, art and wood projects with my campaign to raise awareness for Operation Underground Railroad (OURRESCUE.ORG), an amazing group fighting child sex trafficking around the world. I dabble in wood turning on the lathe, carving, painting with acrylics using pendulum and pouring techniques as well as different video projects with time lapse and other things I find interesting.
Some of the items we create can be purchased at: PocketFullOfSawdust.etsy.com
Your subscription to this channel helps us spread the word and every penny is donated to support Operation Underground Railroad!
100% of our proceeds are donated to OURRESCUE.ORG.
Help the cause by subscribing to our channel, sharing and donating... get involved!
My fundraiser can be found at: https://my.ourrescue.org/fundraisers/dan-preeces-fundraiser
Dan Preece
"Mild Mannered Foot/Ankle Surgeon by day, Wood Cutting Paint Flinging Photographer by Night"
****The majority of music found on our videos is from Ketsa, Bensound.com and Scott Holmes, all very talented sources of great music!
#woodturning #resin #danpreece #woodbowl #woodworking #resinart #lathe
Видео Frosted Pinecones. resin, lathe turned. Support OURRESCUE.ORG purchase: O.U.R. at ArtForOUR.org канала Dan Preece, Art for Operation Underground Railroad
As an Amazon Associate I earn from qualifying purchases. And every penny earned is donated to Operation Underground Railroad at OURRESCUE.ORG.
Here are my commonly used tools/equipment if you'd like to try them out....
- Lathe: (https://amzn.to/3orYsOy) this lathe is freaking amazing, very well built, solid, strong, variable speed, 110 or 220 volt. I couldn't have designed it better.
- Lathe tools: (https://amzn.to/3agd3ay) carbide tip, (https://amzn.to/3t5iMsA) great beginner set
- File Sander: (https://amzn.to/36o3hlE), this is the cheapest and highest quality I've found. Fantastic for those hard to get to sanding projects.
- Angle Grinder: (https://amzn.to/36lgewG), one of my most indispensable tools, (https://amzn.to/3iXtNHW) the flat head helps get into tight spaces, carving and sanding disks are a life saver.
- Grinder Carving Disk: (https://amzn.to/39oWqKG), this is a really great disk for roughing out medium sized projects
- Grinder Sanding Disks: (https://amzn.to/3cj91Rv), fantastic for sanding and minor-moderate shaping stages
- Round Sanding System: (https://amzn.to/3r11N8Q) sleeves go around an inflatable ball (https://amzn.to/2KVCUvW )or make your own foam ball, attaches to a drill, great for tight corners.
- Palm Sander: (https://amzn.to/3r1mJg8), the most important sanding tool, used on almost every job. I like the size of the sand paper for both this and on the lathe by hand.
- Chain Saw: (https://amzn.to/2MbWNj2), has worked well for years, I also bought this electric one (https://amzn.to/3qZOqpp) for the quieter in the garage projects
- Oscillating Tool: (https://amzn.to/3puK4q1) great for cutting and sanding sharp corners and tight spots.
- Super Glue: (https://amzn.to/3pFg5vT) thin and runny, perfect for stabilizing bark or other unstable wood.
- Resin: (https://amzn.to/3t7WSVo), one of the cheaper but higher quality, does it all resins. Great results.
- Pigments: https://amzn.to/3sYC5ng, great quality for resin
- Pressure Pot: (https://amzn.to/3tfp1u2) 5 gallon for the big resin projects to get rid of bubbles, or (https://amzn.to/3pwX0M8) for the smaller average jobs 2.5 gallon, both need minor modifications to work.
- Protection: (https://amzn.to/39t3lm0), best face shield yet for carving and lathe work
My goal is to pair my love for medicine/surgery, video, photography, art and wood projects with my campaign to raise awareness for Operation Underground Railroad (OURRESCUE.ORG), an amazing group fighting child sex trafficking around the world. I dabble in wood turning on the lathe, carving, painting with acrylics using pendulum and pouring techniques as well as different video projects with time lapse and other things I find interesting.
Some of the items we create can be purchased at: PocketFullOfSawdust.etsy.com
Your subscription to this channel helps us spread the word and every penny is donated to support Operation Underground Railroad!
100% of our proceeds are donated to OURRESCUE.ORG.
Help the cause by subscribing to our channel, sharing and donating... get involved!
My fundraiser can be found at: https://my.ourrescue.org/fundraisers/dan-preeces-fundraiser
Dan Preece
"Mild Mannered Foot/Ankle Surgeon by day, Wood Cutting Paint Flinging Photographer by Night"
****The majority of music found on our videos is from Ketsa, Bensound.com and Scott Holmes, all very talented sources of great music!
#woodturning #resin #danpreece #woodbowl #woodworking #resinart #lathe
Видео Frosted Pinecones. resin, lathe turned. Support OURRESCUE.ORG purchase: O.U.R. at ArtForOUR.org канала Dan Preece, Art for Operation Underground Railroad
Показать
Комментарии отсутствуют
Информация о видео
22 ноября 2020 г. 5:13:11
00:10:48
Другие видео канала
Woodturning | Flaming Resin and Maple Burl Pet Urn"The Vinding Road" Wood turning with vine, resin and wood. Hand turned lathe.O.U.R. at ArtForOUR.orgSeashell bowlWoodturning an Inside Out Christmas Tree Ornament with Suspended SnowmanPinecone, needles, blue/white resin bowl. Wood Turning. Lathe work. Support OURRESCUE.ORGepoxy + wood = art bathtub (drewniana wanna) деревянная ванна 木製浴缸Whimsical turning . Using Alumilite amazing clear cast resin , osage orange wood and walnut .Bowl woodturning with epoxy resin"The Wave" Chainsaw Cherry Wood wave carving for O.U.R. at ArtForOUR.org"The Tulip" White birch wood and resin vase, turned on the lathe. Making a flower out of wood.Drechseln: The Flaming Maple BowlThe Wasp Nest. A bowl made from wasp nest, resin on the lathe. Woodturning project. O.U.R."Autumn Windows". Fall leaves, resin, Birch Wood bowl wood turning. Support O.U.R. at ArtForOUR.orgWoodturning - Wood, coconut and resin a Transformation //Madeira, coco e resina uma transformação"Foggy Wheat", resin, wheat, birch wood vase turned on the lathe for O.U.R. at ArtForOUR.org"Roots" A wire tree sculpture mounted in willow wood and cast in resin. Turned on the lathe. O.U.R."Crystal Tree" Wood turning lathe project. Willow wood lamp. Fight child trafficking, ArtForOUR.orgWoodturning - Maple Burl Pieces With Designer EpoxyWoodturning | Project That Sells - How To Fund Your Shop - Hobby