Project Drag Slash | Custom Build

Learn More: http://www.traxxas.com/news/custom-drag-slash

Model/Parts Used:

Slash VXL w/On-Board Audio
http://www.traxxas.com/products/models/electric/58076-21-slash-vxl-oba-tsm
or
http://www.traxxas.com/products/models/electric/slash-vxl-oba-tsm

Funny Car Wheels/Tires (rear)
http://www.traxxas.com/products/parts/6973

Front Wheels
http://www.traxxas.com/products/parts/2475

Stub Axles (rear)
http://www.traxxas.com/products/parts/2753X

Tires, street slicks (front)
http://www.traxxas.com/products/parts/3471

Suspension arms (front)
http://www.traxxas.com/products/parts/5531

Suspension arms (rear)
http://www.traxxas.com/products/parts/2750R

Bandit Camber Links
http://www.traxxas.com/products/parts/2441A

Bandit Half-shaft axles
http://www.traxxas.com/products/parts/1651

Turnbuckles, toe-links
http://www.traxxas.com/products/parts/5538

Front bumper
http://www.traxxas.com/products/parts/5835

Wheelie bar assembly
http://www.traxxas.com/products/parts/3678

Button-head screws (3x20mm)
http://www.traxxas.com/products/parts/2580

Shock Rebuild Kit
http://www.traxxas.com/products/parts/6099

Front Axles
http://www.traxxas.com/products/parts/2437

Suspension Pin Set
http://www.traxxas.com/products/parts/6834

Button-head screws (3x25mm)
http://www.traxxas.com/products/parts/2581

Lock nuts (3mm)
http://www.traxxas.com/products/parts/2745

Double-sided adhesive (for OBA sound module)
http://www.traxxas.com/products/parts/6581

Blue Aluminum Wheels for Wheelie Bar
http://www.traxxas.com/products/parts/5186A

Shoulder screws
http://www.traxxas.com/products/parts/3642X
Aftermarket Parts:
14mm Wheel Hexes (needed if using #6968 Funny Car wheels)

Compatible RC body:
http://parmapse.shptron.com/p/68-muscle-sc-baja-040-clear-body
http://parmapse.shptron.com/p/69-r-t-muscle-sc-baja-040-clear-body
http://parmapse.shptron.com/p/65-muscle-baja-sc-drag-040-clear-body

Magnetic Body Mounting Kit
http://www.prolineracing.com/accessories/crosshair-body-mounting-kit.asp

Tools Used:
-1.5mm, 2mm, & 2.5mm hex tools
- 5.5mm & 7mm nut drivers
- Needle nose pliers
- Hobby knife
- Electric drill
- 2mm, 2.5mm, & 1/8in drill bits
- Body reamer
- RC body paint
- RC tire glue
- All-purpose cleaner
-4mm wrench
- Small flathead screwdriver
- Side cutters
- RC body scissors (curved & straight)
- U-joint wrench
- Sheet of paper (for painting)
- Permanent marker (to mark position for OBA speakers)
- Table vise
- Dremel tool with cutting disk and sanding drum
- Microfiber cloth
- Safety glasses

Wear proper safety goggles and use caution when working with rotary tools or general hobby tools. This project build should only be performed with the supervision of a responsible and knowledgeable adult.

Видео Project Drag Slash | Custom Build канала Traxxas Support