Working of Servo Control Valve Explain with Animation.
#ServoControlValve
#ControlValve
#WorkingServoControlValve
#TypesOfValve
Working of Servo Control Valve Explain with Animation
An electrohydraulic servo valve (EHSV) is an electrically operated valve that controls how hydraulic fluid is sent to an actuator. Servo valves are often used to control powerful hydraulic cylinders with a very small electrical signal. Servo valves can provide precise control of position, velocity, pressure, and force with good post movement damping characteristics.
An electric command signal (flow rate set point) is applied to the integrated position controller which drives the pilot stage. The thereby deflected nozzle flapper system produces a pressure difference across the drive areas of the spool and affects its movement. The position transducer (LVDT) which is excited via an oscillator measures the position of the spool (actual value, position voltage). This signal is then demodulated and fed back to the controller where it is compared with the command signal. The controller drives the pilot stage until the error between command signal and feedback signal will be zero. Thus the position of the spool is proportional to the electric command signal.
Видео Working of Servo Control Valve Explain with Animation. канала TS7 StudyZone
#ControlValve
#WorkingServoControlValve
#TypesOfValve
Working of Servo Control Valve Explain with Animation
An electrohydraulic servo valve (EHSV) is an electrically operated valve that controls how hydraulic fluid is sent to an actuator. Servo valves are often used to control powerful hydraulic cylinders with a very small electrical signal. Servo valves can provide precise control of position, velocity, pressure, and force with good post movement damping characteristics.
An electric command signal (flow rate set point) is applied to the integrated position controller which drives the pilot stage. The thereby deflected nozzle flapper system produces a pressure difference across the drive areas of the spool and affects its movement. The position transducer (LVDT) which is excited via an oscillator measures the position of the spool (actual value, position voltage). This signal is then demodulated and fed back to the controller where it is compared with the command signal. The controller drives the pilot stage until the error between command signal and feedback signal will be zero. Thus the position of the spool is proportional to the electric command signal.
Видео Working of Servo Control Valve Explain with Animation. канала TS7 StudyZone
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Fundamentals of Fluid Power 6.2.2 - Servovalve OperationSolenoid-Controlled Pilot-Operated Directional Control ValveWhat is a PID Controller?PROGRESS FLUID Proportional Valve Rexroth Bosch GroupTypes of Control ValvesExplaining Directional Valve Repair - Full Dismantle and ReassemblyPressure Compensated Pump Adjustments - Part 1Episod 27 Proportional electro (servo) hydraulic pilot relief valve in hindiServovalve Rexroth Bosch GroupValve Solenoid BasicsProportional hydraulics, proportional valve, servo valve - how it works - Technical animationIntroduction to Proportional (Servo) Valves (Full Lecture)Servo valve test unitAnimation | How schematic symbols for control valves is derived | How 3 position 4 port valve works.Hydraulic proportional and servo valve operation, uses and typesFlow Control Valves in Hydraulics - Full lecture with animationPump Displacement Control BasicsFluid Power] - 6.2.2 - Servovalve OperationDirectional Control Valve Basics - Part 1Learn hydraulics - 4/2 Directional control valve