Nextion Display on a UBITX
Pre release view of a new display for the UBITX
Firmware Created by Dr. Ian Lee (KD8CEC)
The modified screen was created By Allen - KN4UD
Nextion touch display 3.2E
Only 4 wires to connect +5 gnd and 2 for serial connection to raduino
Adds a professional look and function to ubitx radio.
Very quite, no detectable noise
73
Joe
VE1BWV
Видео Nextion Display on a UBITX канала joe basque
Firmware Created by Dr. Ian Lee (KD8CEC)
The modified screen was created By Allen - KN4UD
Nextion touch display 3.2E
Only 4 wires to connect +5 gnd and 2 for serial connection to raduino
Adds a professional look and function to ubitx radio.
Very quite, no detectable noise
73
Joe
VE1BWV
Видео Nextion Display on a UBITX канала joe basque
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
#056 Inexpensive Intelligent Touch Displays for Arduino, ESP8266, and others: Nextion (Tutorial)UBITX WITH DUAL NEXTION DISPLAYS 3.2 AND 7 INCHmcHF QRP SDR - RS-918SSB - Full Over-View of FunctionsuBITX HF Tranceiver - OverviewUBITX - QRP RADIO with CAT CONTROL- SDR FEATURESHow to Make Stunning Menus on Arduino Nextion Displays: GIMP TutorialUBITX VER 2.9BU INSTALLATION RESULTSBuilding the v6.1 Micro BITX from India (#251)uBITX with Nextion LCD, TJC LCD and Factory Reset TestuBitx v6 New Kit AssemblyuBITX (v6) Frequency AlignmentuBITX Assembly Montage and Initial Power On FootageUBITX With Dual Nextion DisplayNextion Touch Screen On A uBitxVK3YE's 'non-invasive' AGC circuit for BiTx40 or similar QRP rigsuBITX with Nextion LCD (CEC Firmware) - Installation and IntroductionF5NPV - UBITX V5 all in oneStandalone Signal Analyzer for uBITX (Version 1.097) - (#3/3)uBITX $130 HF/SSB radio part 5 build a SignaLink USB cableNextion 7" Diamond series HMI on Marlin Kimbra firmware