BMW e30 Head Gasket Replacement HOW to : part 2 INSTALLATION

BMW e30 Head Gasket Replacement
After a long wait, I finally get the head back from the machine shop completely rebuilt. in this video, I will show you how I install the head and head gasket. I recommend getting your head done by the machine shop as they have the tool to test and inspect.... much much better than just eyeballing it. they can also install a new valve seal, check for any damage on the valves, and they will even adjust the valve clearance for you. You can do it without sending it to a machine shop but Do it right once and be done with it.
torque specification
**Stock bolt Style 29-34 ft-lbs, then wait 15 minutes, and 43-47 ft-lbs. then run the engine for 25 minutes and turn each bolt another 25-30 degrees.
**Torx bolts need to be tightened to 22 ft-lbs, turned 90 degrees (1/4 turn), and then an additional 90 degrees.

Видео BMW e30 Head Gasket Replacement HOW to : part 2 INSTALLATION канала Mechanic's Life