Megaflo Cold water Inlet control - 3 bar
THIS NEEDS TO BE DONE by a Certified Un-vented Cylinder Plumber - Please do not do this yourself.
Megaflo Inlet water control - 3 bar
Replacement of old Megaflo water balance control. This Vlog shows the new parts and the replacement in place. There is a closer look at the old kit once removed. Below is the comments from BAXI support as to the correct parts (2016/17). Ours was a grey top cylinder.
The cold water combination valve part number is 95605817 if the Megaflo CL210 cylinder has a white lid on top of the cylinder.
The cold water combination valve part number is 95605894 if your Megaflo CL210 cylinder has a grey lid on top of it.
Part 2 shows the new system installed and the dismantling of the old balance flow showing its filter.
~Part was purchased here:-
~https://www.advancedwater.co.uk/spare-218-388-0012.html
Part 2 - https://youtu.be/BGdew7hmEt4
Видео Megaflo Cold water Inlet control - 3 bar канала Joe Woodford
Megaflo Inlet water control - 3 bar
Replacement of old Megaflo water balance control. This Vlog shows the new parts and the replacement in place. There is a closer look at the old kit once removed. Below is the comments from BAXI support as to the correct parts (2016/17). Ours was a grey top cylinder.
The cold water combination valve part number is 95605817 if the Megaflo CL210 cylinder has a white lid on top of the cylinder.
The cold water combination valve part number is 95605894 if your Megaflo CL210 cylinder has a grey lid on top of it.
Part 2 shows the new system installed and the dismantling of the old balance flow showing its filter.
~Part was purchased here:-
~https://www.advancedwater.co.uk/spare-218-388-0012.html
Part 2 - https://youtu.be/BGdew7hmEt4
Видео Megaflo Cold water Inlet control - 3 bar канала Joe Woodford
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
UNVENTED HOT WATER TANK COMBINATION VALVES - How they work - Plumbing TipsMegaflo balance control Part 2How to remove and clean the inline strainer on a Megaflo cylinderHOW TO BUNG A CENTRAL HEATING HEADER TANK to save DRAINING THE SYSTEM & Capping/moving A RADIATORHow to recharge the air gap in a Megaflo cylinderHow to replace a central heating 3 port divertor valveUnvented Cylinder- Megaflo MaintenanceHow to fix a dripping or leaking PRV / pressure relief valveHow Unvented Hot Water Cylinder Works - Plumbing Training VideoMAJOR PROBLEM WITH THE TILES ON THE HOUSE RENOVATION.... THE TILES ARE COMING OFF!!!!!Rebuild or Repair Water Pressure Valve or Regulator - Honeywell Braukmann D05DIY Project - Replacing Cold Water Expansion Valve - Part 02 (DIYbyNZguy)Plumbing - How Does a Hot Water Cylinder Work ?How to fit a pressure reducing PRV valveRefil air gap in mega flowSystem Boiler & Unvented Hot Water Cylinder InstallationRheem RETEX - 13 Install 2018common fault,Unvented balanced cold mainsHow To Service An Unvented Hot Water Cylinder Roy FuglerSetting trunking like a pro - @loadout HQ rewire - Commercial electrician