I made F1 Ground Effect for my RC Car
Ground Effects were very effective aerodynamic tools when it came to adding downforce to F1 Cars. But can the add downforce to something as small as an RC Car? Today...we will find out.
Here are some affiliate links to parts used in this video:
The Tires are Gold Hoons on the rear:
https://amzn.to/3nEkOC9
To use these wheels you will need 17mm adapters similar to these:
https://amzn.to/3pp7rpH
Silicone Weather Stripping:
https://amzn.to/44SiKau
The original car was a traxxas slash/Raptor but was heavily modified:
https://amzn.to/3HMUegL
The Motor was upgraded to a Velineon 3500:
https://amzn.to/42iG7YQ
The chassis was converted to a low center of gravity (LCG) chassis:
https://amzn.to/44K7U67
ABS sheet used to form the undertray:
https://amzn.to/42eNj8D
Please reach out with any questions on other parts! I may make a small commission on the affiliate link sales, but they will not cost you anything.
Видео I made F1 Ground Effect for my RC Car канала Engineering After Hours
Here are some affiliate links to parts used in this video:
The Tires are Gold Hoons on the rear:
https://amzn.to/3nEkOC9
To use these wheels you will need 17mm adapters similar to these:
https://amzn.to/3pp7rpH
Silicone Weather Stripping:
https://amzn.to/44SiKau
The original car was a traxxas slash/Raptor but was heavily modified:
https://amzn.to/3HMUegL
The Motor was upgraded to a Velineon 3500:
https://amzn.to/42iG7YQ
The chassis was converted to a low center of gravity (LCG) chassis:
https://amzn.to/44K7U67
ABS sheet used to form the undertray:
https://amzn.to/42eNj8D
Please reach out with any questions on other parts! I may make a small commission on the affiliate link sales, but they will not cost you anything.
Видео I made F1 Ground Effect for my RC Car канала Engineering After Hours
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Red Bull Soapbox Race Dallas - Final Build and Competition](https://i.ytimg.com/vi/ryhPnpRsur0/default.jpg)
![I Made a Robotic Super Soaker with VR Goggles](https://i.ytimg.com/vi/EBk7yNH5tKk/default.jpg)
![Why Formula 1 Cars need DRS - RC Version](https://i.ytimg.com/vi/juGxxFgXGdo/default.jpg)
![3D Printed Molds for Rubber Parts to Save $$$$](https://i.ytimg.com/vi/OF1FrTead7Y/default.jpg)
![It's Not Impossible...but close - SCX24 course](https://i.ytimg.com/vi/GRoWs2Iutb0/default.jpg)
![Vibration Damping, Vibration Isolation and Vibration Analysis Using Inventor Nastran](https://i.ytimg.com/vi/B2Cg8_2wDAw/default.jpg)
![F1 Car vs Dragster - the Downforce Showdown](https://i.ytimg.com/vi/K5iDcZ5bVs0/default.jpg)
![Building and Torture Testing a 4WD Robot Chassis](https://i.ytimg.com/vi/63go-gQNn5o/default.jpg)
![How a Robotic Nerf Rocket Launcher Works](https://i.ytimg.com/vi/pUFFRjGf5Js/default.jpg)
![Remote Controlled Rocket Car #rocket #3dprinting](https://i.ytimg.com/vi/MCtCzIkVT8U/default.jpg)
![Forged Carbon Fiber Wings with 3D Printed Molds](https://i.ytimg.com/vi/3kPTGFGMoZI/default.jpg)
![DRS on an RC car](https://i.ytimg.com/vi/X7sD_aB0bvs/default.jpg)
![Active Aerodynamics Design and Destruction](https://i.ytimg.com/vi/uhwLm_04eG4/default.jpg)
![Worlds fastest Hotwheel Launcher](https://i.ytimg.com/vi/-i-mPmJi6HE/default.jpg)
![Back from the Dead - Active Aerodynamics Round 2](https://i.ytimg.com/vi/o2OSTdpXlGQ/default.jpg)
![I Put a Cold Gas Thruster on my RC Rocket Car](https://i.ytimg.com/vi/pKmrZ8ir6c0/default.jpg)
![Testing 3D Printed Rocket Cars is Hard.](https://i.ytimg.com/vi/eFq7gw_ZYZs/default.jpg)
![You Can't Hide from the Face Tracking Nerf with AI](https://i.ytimg.com/vi/bPh1TztVlwk/default.jpg)
![241% More Grip with a Fan Car](https://i.ytimg.com/vi/32zCMaGEY8I/default.jpg)
![3D Printed Molds with Silicone Rubber from Smooth On | Food Safe Molds & 2 Part Molds](https://i.ytimg.com/vi/LBnUZ-AEuWw/default.jpg)