Cutting table for roller blinds REXEL UK-2

https://www.rexelpoland.com/en/product/cutting-table-for-roller-blinds-uk-2

REXEL UK-2 it’s the second generation cutting table, using it one can produce blinds faster and simpler! Table construction is made of closed, high quality steel profiles with powder coating which provides longstanding and protection against corrosion for a very long time. Tabletop edges protected with white powder coated aluminium angles; this solution provides impressive tabletop durability. Brand new mechanical knife construction with high speed electrical motor helps to achieve very accurate fabric cut.
Table UK-2 can cut roller blinds fabric from rolls up to 3000 mm width. Tabletop illumination zone is an additional option that helps to inspect blinds fabric before cut.

Standard widths of post cutting table after cutting line are: 3100 mm, 3400 mm, 4000 mm.

SPECIFICATIONS:

Control panel with durable buttons;
Tabletop illumination zone for fabric inspection;
Improved manual positioner for 90º angle set;
Pneumatic clamping line;
Table is completely made of European materials;
Energy chain for cutter cables protection;
Two direction cutting ability;
Round blade sharpening device;
Cutting width: do 3000 mm
Tabletop width: 3200 mm
Tabletop length after cut-off line: 3100 mm or longer
Whole width: 3620 mm
Whole length: 3750 mm or longer
Tabletop height: 900 mm
Cutting speed: Min: 0,3 m/s, Max: 0,5 m/s
Blade rotation speed: 4200 rpm
Blade diameter: 108 mm
Voltage: 230 V
Wattage: 700 W
Ultrasonic knife: -
Mechanical round knife: Yes
Fabric clamp: Pneumatic, one side
Screen: Yes, optional

Видео Cutting table for roller blinds REXEL UK-2 канала Rexel Poland