А Plastic Piece Wrapped in Leather - Car Upholstery
✅Any donation to support the channel will be much appreciated!
Paypal : cechaflo@gmail.com
✅Get our courses at: https://www.cechaflo.com
---------------------------------------------------------------------------------
Another way to approach and cover in leather a car seat plastic piece. I have used burgundy color, 1.2 mm thick automotive leather. As explained before I have taken advantage of 'stretchy side' of leather. Besides, to improve the stretching I have used a 'special liquid softener' to somehow soften the fibers of this strong material. The 'narrow pocket' was molded by doing some cuts in its corner then joined with 'carpenter's glue'. This pocket could be done in one piece if softened enough and shaped on a hard mold.
The main idea on this process is try to not force the leather material onto lower areas, otherwise it could unstick because of tension. It should be glue down as gently as possible. It is advisable to apply two coats of glue. The first one acts as a primer. The plastic should be sanded off to get a better adherence of glue.
I have used a 'polyurethane transparent glue' to attach the pocket to plastic piece inside. As we can see, it can be activated with some hot air after being dry. Yellow contact cement for the other parts.
I hope you find this information useful!
Cesar
Видео А Plastic Piece Wrapped in Leather - Car Upholstery канала Cechaflo
Paypal : cechaflo@gmail.com
✅Get our courses at: https://www.cechaflo.com
---------------------------------------------------------------------------------
Another way to approach and cover in leather a car seat plastic piece. I have used burgundy color, 1.2 mm thick automotive leather. As explained before I have taken advantage of 'stretchy side' of leather. Besides, to improve the stretching I have used a 'special liquid softener' to somehow soften the fibers of this strong material. The 'narrow pocket' was molded by doing some cuts in its corner then joined with 'carpenter's glue'. This pocket could be done in one piece if softened enough and shaped on a hard mold.
The main idea on this process is try to not force the leather material onto lower areas, otherwise it could unstick because of tension. It should be glue down as gently as possible. It is advisable to apply two coats of glue. The first one acts as a primer. The plastic should be sanded off to get a better adherence of glue.
I have used a 'polyurethane transparent glue' to attach the pocket to plastic piece inside. As we can see, it can be activated with some hot air after being dry. Yellow contact cement for the other parts.
I hope you find this information useful!
Cesar
Видео А Plastic Piece Wrapped in Leather - Car Upholstery канала Cechaflo
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
How to Vinyl Wrap a Door Panel (OEM)- Car UpholsteryBentley Interior & Leather FactoryHow to Change Car Interior Color with Dye: BMWDIY Custom door upholstery tutorial (no sewing machine required embossed flames and badge)BMW e30. Middle Console Re-trimmed in Leather. Time-lapse 100s to 10sHow to wrap with leather your Golf 7 interior door panelsLearn Hand Techniques to Mold Leather - UpholsteryКак сделать подиумы / Citroen C-Elysee #magicsound_ntA Plastic Piece Wrapped in Leather - Auto UpholsteryMISTAKES TO LEARN FROM - Upholstery Vinyl Amp Rack Beauty PanelNISSAN SKYLINE GT-R33 PROJECT - Leather-Wrapping - Part VI Car upholsteryCar Sunvisor in Leather - Video 1 Automotive upholsteryArmrest in Leather (Jaguar X-Type) - Car UpholsteryShift Knob in Leather - Auto UpholsteryHow to Make Custom Interior Car Panels. Car Door Panel upholstery BMW Z3. Car upholstery.What you need to get started in Automotive Upholstery.Leather Vinyl Dashboard WrapHow to Trim a Car Floor Carpet - Upholstery for beginners (old school)PART 1 TRUCK BENCH SEAT FOAM FROM SCRATCH CUSTOM UPHOLSTERY ALCHEMY KUSTOM