Slew rate using op amp

In electronics, the slew rate is defined as the maximum rate of output voltage change per unit time. It is denoted by the letter S. The slew rate helps us to identify the amplitude and maximum input frequency suitable to an operational amplifier (OP amp) such that the output is not significantly distorted.
The slew rate should be as high as possible to ensure the maximum undistorted output voltage swing.
Slew rate is a critical factor in ensuring that an OP amp can deliver an output that is reliable to the input. Slew rate changes with the change in voltage gain. Therefore, it is generally specified at unity (+1) gain condition.

A typically general-purpose device may have a slew rate of 10 V/u S. This means that when a large step input signal is applied to the input, the electronic device can provide an output of 10 volts in 1 microsecond.
#opamp
#slewmotivation
#electricalengineering
#linearintegratedcircuits
linear Integrated Circuits playlist : https://www.youtube.com/playlist?list=PL4xnVegekvA1yZaWtAevOvc51Ufz9K17T
VLSI Design Playlist: https://www.youtube.com/playlist?list=PL4xnVegekvA0f4P7Rwx-51uvF--V62EyO
VLSI Lab:https://www.youtube.com/playlist?
list=PL4xnVegekvA0Bcq4VWCgqvpkMWv9isEMv
Electronic Device and Circuits:https://www.youtube.com/playlist?list=PL4xnVegekvA2sB-jSWSkZeaDUHbOreJuY
Multisim:https://www.youtube.com/playlist?list=PL4xnVegekvA0_OEZXp3lKXCJcC4JxseZq
Circuit Analysis:https://www.youtube.com/playlist?list=PL4xnVegekvA0r5tUMTZHzgEC1rSUVY5bk
Digital Electronics :https://www.youtube.com/playlist?list=PL4xnVegekvA1C6oHJEg8KSDijmPXMj9PC

Видео Slew rate using op amp канала ECE VIDEOS