RC EDF afterburner - proof of concept

I used a 35mm RC EDF out of a MIG. I took an empty light gas refill can and put in a special shaped brass tube as burning chamber. I attached some second inner metal tube to avoid burning the gas refill can and to allow a cooling effect.

For this proof of concept, I used a modified blow torch for the butane gas regulation.

Gear I used for this:
• EDF 35mm with 9000kv Brushless Outrunner Motor out of a MIG 15 from Hobbyking: https://hobbyking.com/en_us/mig-15-35mm-edf-micro-jet-epo-arf.html?___store=en_us
• BLHeli Series 12A ESC from EMAX: https://www.emaxmodel.com/blheli-series-12a-esc.html
• Turnigy Nano-Tech-370mah 3S 25 ~ 40C Lipo-Pack: https://hobbyking.com/de_de/turnigy-nano-tech-370mah-3s-25-40c-lipo-pack.html?___store=de_de
• FrSky VD5M 2.4Ghz 5CH Receiver: https://hobbyking.com/en_us/frsky-vd5m-2-4ghz-5ch-micro-receiver-telemetry-capable.html?___store=en_us
• Old Graupner TX with obsolete FrSky 2,4 GHz module
• Blowtorch
• Empty lighter gas refill can
• Tubes, pipes and glue

See discussion on RC Groups: https://www.rcgroups.com/forums/showthread.php?2900358-Real-flame-afterburner-on-35mm-EDF#post37665443

Видео RC EDF afterburner - proof of concept канала HennPro