DCS World: Ka-50 - Trim, Hover, Autopilot, ABRIS, Waypoints Navigation Guide (Part 2)

Forgot to say: Autopilot Mode - Desired Track (Flight Plan mode)
You can set which waypoints you want to fly over by selecting Waypoint mode on your PVI pressing the waypoint then pressing enter key and followed by another waypoint then pressing enter key again.
This stores the data and when you use desired track you can fly trough them in Order

Mission Editor:
- Creating Flight Plan : 0:25
- INU Fix Points: 1:26
- Nav Targets: 2:28

Cockpit:
- ABRIS & PVI Intro: 5:52
- PVI: 4:42
- PVI: Creating Nav TargetI: 6:00
- Trim & Colective Brake: 9:24
- Autopilot: Enroute Mode: 11:14
- PVI: Extra Information 13:35
- ABRIS: INU FIx Points 14:58
- PVI Changing Course Via Autopilot 15:24
- PVI: Going to and Utilizing INU Target Points 16:07
- PVI: Slewing Shkval Sensor to INU Target Point 17:37
- Autopilot: Flight Director Mode 21:00
- Autopilot: Hover Hold & Hover Landing 27:02
---------------------------------
PC Specs
---------------------------------
Processor: Intel i7 920 (OC at 3.6 Ghz)
Graphics Card: Nvidia Windforce GTX 960 2 Gig Vram (OC at 1440 Mhz)
Ram: 10 Gig DDR 3
SSD: 850 Evo 258 Gigs drive

Видео DCS World: Ka-50 - Trim, Hover, Autopilot, ABRIS, Waypoints Navigation Guide (Part 2) канала Rlaxox