EP 4 Everything Wet Dry Wet - From Mono To Wet Dry Wet

This is the episode. Can you have ONE pedal board that allows you to run -
Mono
Stereo
Pseudo WD
Pseudo WDW
Traditional / Typical WD
Traditional / Typical WDW

The answer???
Watch the video to find out.

Gear mentioned in this video and manufacturers that make it!

GOODWOOD CUSTOM JUNCTION "TRAILBLAZER"
https://goodwoodaudio.com/contact-goodwood/
info@goodwoodaudio.com
For more info!

Features:
-2 Independent stereo loops
-Can run 2 loops in series or parallel
-Stereo input and Stereo output (on TRS jacks)
-Dry output w/ Built in mute (hold foot switch)
-2 Line mixers built in (one for Left and one for Right)
-Phase control on Loop 1 and Phase control on Loop 2
-2.1mm 9V, center neg. power. 150mA

The below is assuming you have a guitar, dry pedals, wet effects that have an option for kill dry and amps.

Mono - No additional gear needed

Stereo/mono rig:
Output TX (Goodwood Audio)

Pseudo WD / Pseudo WDW / Stereo / Mono:
Output TX (Goodwood Audio)
Isolator TX (Buffered split, isolation, Mute on dry output.) - Goodwood Audio

Traditional / Typical WD and WDW:
Output TX
Trailblazer (Goodwood Custom Junction mentioned above)
OR
3 way buffered splitter
RJM Mini Line Mixer
Output TX

Traditional / Typical WDW with one amp
Same as Typical WD/WDW but you also need
1. Amp Simulator (Strymon Iridium as an example)
2. Isolator (if running Amp sim before wet effects, not needed if running after wet effects)
3. Output TX

Make sure you have good quality power and cables! Not having these can quickly add noise to an already complex rig!

Get in touch info@goodwoodaudio.com if you have questions!

Видео EP 4 Everything Wet Dry Wet - From Mono To Wet Dry Wet канала Goodwood Audio