Structural Analysis using ETABS - Fundamentals
In this tutorial, we learn how to use ETABS, a structural analysis and building design software package. ETABS has a lot to offer, so this video focuses on learning the basics of how to define a model, apply loads and load combinations, and interpret the analysis results.
We first define material and section properties. Then we draw the two-dimensional truss model. Finally, we place point and distributed loads and analyze the deflections, reactions, and axial force and moment diagrams.
Chapters:
0:00 Introduction
0:46 Welcome to ETABS
2:00 Navigating Views
3:33 Materials and Sections
5:30 Drawing the Structure
8:33 Modifying the Frames
11:06 Boundaries and Restraints
12:17 Load Patterns and Combinations
15:25 Applying Loads
19:33 Analysis and Results
Видео Structural Analysis using ETABS - Fundamentals канала Structures with Prof. H
We first define material and section properties. Then we draw the two-dimensional truss model. Finally, we place point and distributed loads and analyze the deflections, reactions, and axial force and moment diagrams.
Chapters:
0:00 Introduction
0:46 Welcome to ETABS
2:00 Navigating Views
3:33 Materials and Sections
5:30 Drawing the Structure
8:33 Modifying the Frames
11:06 Boundaries and Restraints
12:17 Load Patterns and Combinations
15:25 Applying Loads
19:33 Analysis and Results
Видео Structural Analysis using ETABS - Fundamentals канала Structures with Prof. H
Показать
Комментарии отсутствуют
Информация о видео
21 октября 2022 г. 8:15:33
00:24:45
Другие видео канала
![Stress, Internal Forces, and Shear and Moment Diagrams - Intro to Structural Analysis](https://i.ytimg.com/vi/JVyXdJOV2ew/default.jpg)
![Direct Analysis Method for Steel Buildings using RISA 3D](https://i.ytimg.com/vi/D5P2eAXx0Lg/default.jpg)
![Moment Capacity of Reinforced Concrete Beams](https://i.ytimg.com/vi/2ijd2Apbn9o/default.jpg)
![Nonlinear Geometry and Large Displacement Analysis - FEA using ANSYS - Lesson 7](https://i.ytimg.com/vi/JU1yC1ODxFM/default.jpg)
![Plasticity - FEA using ANSYS - Lesson 8](https://i.ytimg.com/vi/9wF2Yp2Y4-s/default.jpg)
![Cracking Moment of Reinforced Concrete Beams - Gross Section vs Transformed Section](https://i.ytimg.com/vi/Cu-MxKu5w54/default.jpg)
![Design Envelopes for Worst-Case Demands with Movable Live Loads](https://i.ytimg.com/vi/OctwihiOZ2k/default.jpg)
![Transformed Sections and Cracked Moment of Inertia](https://i.ytimg.com/vi/eiz2Qi6RWtM/default.jpg)
![Intro to Structural Analysis - Loads and LRFD](https://i.ytimg.com/vi/vh8JmHjhECk/default.jpg)
![Flat Roof Snow Loads using ASCE 7-22](https://i.ytimg.com/vi/0zOZSCLea54/default.jpg)
![Truss Analysis - FEA using ANSYS - Lesson 3](https://i.ytimg.com/vi/3WsFm8NnHNo/default.jpg)
![How do structures carry wind and seismic loads? An Intro to Lateral Force Resisting Systems](https://i.ytimg.com/vi/yFX4JLe3JJM/default.jpg)
![Introduction to ANSYS - FEA using ANSYS - Lesson 1](https://i.ytimg.com/vi/h7dhDe-fZeg/default.jpg)
![Influence Lines and Moving Loads - Intro to Structural Analysis](https://i.ytimg.com/vi/cNdEgnCmNU0/default.jpg)
![Mesh Refinement and Best Practices - FEA using ANSYS - Lesson 5](https://i.ytimg.com/vi/5XwVYm-kwT4/default.jpg)
![Concrete Beam Design 101 - Tension Reinforcement](https://i.ytimg.com/vi/sVfCW8YLOkE/default.jpg)
![Deflection of Reinforced Concrete Beams - Example using ACI 318-19](https://i.ytimg.com/vi/jI6wwjby9Ms/default.jpg)
![Projected Loads and Snow Loads - Intro to Structural Analysis](https://i.ytimg.com/vi/t5k2IEd5ffo/default.jpg)
![Frame Analysis - FEA using ANSYS - Lesson 4](https://i.ytimg.com/vi/hb7BUcug8wY/default.jpg)
![Concrete Microplane Model - FEA using ANSYS - Lesson 10](https://i.ytimg.com/vi/JXbZnhGZliY/default.jpg)