Fuel Tank Mount EXPERIMENTAL HELICOPTER BUILD SERIES (Part 27)
In this episode i mount a Aluminum Fuel Tank to the fuselage of a ultralight homebuild helicopter.
Rubber pads between the tank and the frame to prevent from vibration will be added in the final assembly.
SUPPORT THIS CHANNEL: https://www.paypal.com/donate/?hosted_button_id=NZ4UF9DXLCMKC
The main reasons i located the tank in this position :
- the weight of the tank (fuel) low to the ground to help prevent a dynamic and static roll-over in my first stages of flight testing.
- I kept it close to the center of gravity (under the main rotor mast), to minimise the change in weight distribution as fuel is burned during flight.
- i did not want to locate the tank higher up closer to my head in case of a fire or leakage of the tank. (Safety Issue)
- practical to use the free space under the seat and i prefer the look of a fully integrated fuel tank instead of a tank attached for example to the main rotor mast.
This is part 27 of the EXPERIMENTAL HELICOPTER BUILD SERIES.
Видео Fuel Tank Mount EXPERIMENTAL HELICOPTER BUILD SERIES (Part 27) канала ultralight helicopter
Rubber pads between the tank and the frame to prevent from vibration will be added in the final assembly.
SUPPORT THIS CHANNEL: https://www.paypal.com/donate/?hosted_button_id=NZ4UF9DXLCMKC
The main reasons i located the tank in this position :
- the weight of the tank (fuel) low to the ground to help prevent a dynamic and static roll-over in my first stages of flight testing.
- I kept it close to the center of gravity (under the main rotor mast), to minimise the change in weight distribution as fuel is burned during flight.
- i did not want to locate the tank higher up closer to my head in case of a fire or leakage of the tank. (Safety Issue)
- practical to use the free space under the seat and i prefer the look of a fully integrated fuel tank instead of a tank attached for example to the main rotor mast.
This is part 27 of the EXPERIMENTAL HELICOPTER BUILD SERIES.
Видео Fuel Tank Mount EXPERIMENTAL HELICOPTER BUILD SERIES (Part 27) канала ultralight helicopter
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Helicopter Engine Install #shortsCarburetor Reinforcement Plate #shortsHelicopter Roll-OverTwin Carburetor Mount #shortsDissymmetry Of Lift on HelicoptersDangerous Mast Bumping on HelicoptersThe Characteristics of AirThe 3 Axes of Flight on HelicoptersFuel Delivery System #shortsFeathering Effect of HelicoptersAdvancing + Retreating Blades on HelicoptersAlternative Take-Off ProceduresLanding on Helicopter FlightDrag on HelicoptersEngine Exhaust Install EXPERIMENTAL HELICOPTER BUILD SERIES (Part 54)Tail Rotor Gearbox #shortsManual Belt-Drive Clutch #shortsCockpit Instrument Panel EXPERIMENTAL HELICOPTER BUILD SERIES (Part 9)Main Rotor Control System #shortsRotax Engine Install EXPERIMENTAL HELICOPTER BUILD SERIES (Part 53)Fuel Tank Update EXPERIMENTAL HELICOPTER BUILD SERIES (Part 59)