Загрузка страницы

LED Tutorial: Light a 10W LED from 12V - Simple & Cheap

Help support Julian's LED videos on Patreon: https://www.patreon.com/julian256

A cheap and simple way to connect a 10W LED to a 12 volt supply. A current regulated LED driver keeps the LED at maximum brightness, while a heatsink and fan keeps it at a safe temperature. Total cost of parts, including the car cigar lighter plug and cable, is around £4.

2 Pin 50mm DC 12V VGA Card Cooler Heatsinks Cool Fan SY http://r.ebay.com/jVvnaY

5 X High Power 10W Warm White DC 9-11V LED Beads Lamp Bulb Chips 900-1000LM SMD http://r.ebay.com/BHbfHJ

1pcs Power Driver for 1x10w LED Light Lamp 950mA 12V MR16 http://www.ebay.com/itm/1pcs-Power-Driver-for-1x10w-LED-Light-Lamp-950mA-12V-MR16-/121080902070?roken=cUgayN&soutkn=TotL42

12V 24V Male Car Cigarette Lighter Socket Plug Connector On Off Switch 1.5m DBX http://r.ebay.com/SLv2Op

Видео LED Tutorial: Light a 10W LED from 12V - Simple & Cheap канала Julian Ilett
Показать
Комментарии отсутствуют
Введите заголовок:

Введите адрес ссылки:

Введите адрес видео с YouTube:

Зарегистрируйтесь или войдите с
Информация о видео
22 сентября 2014 г. 19:41:52
00:12:14
Яндекс.Метрика