Preparing My New BMW Engine To Go Back In!
In this video I prepare my replacement N54 to go back in to my E90 335i.
I do the valve cover and oil pan gasket along with replacing a number of seals. I move over my index 12 injectors and replace all the O-rings on the turbos along with mounting them.
I basically tackle maintenance that would otherwise be difficult if the engine was still in the car.
This is all in preparation for reinstalling the engine in the car.
I clean the intake valves and clean up the block a little. If you're interest in my intake valve cleaning video you can find that here:
https://www.youtube.com/watch?v=Kn6NVHLy-Xc
If you are interested in the oil cooler I purchased you can find that here (affiliate):
http://ebay.us/pdRL0d
If this is the first video you are catching of mine please consider subscribing. I upload regularly.
Thanks for watching :)
Видео Preparing My New BMW Engine To Go Back In! канала Vehicular DIY
I do the valve cover and oil pan gasket along with replacing a number of seals. I move over my index 12 injectors and replace all the O-rings on the turbos along with mounting them.
I basically tackle maintenance that would otherwise be difficult if the engine was still in the car.
This is all in preparation for reinstalling the engine in the car.
I clean the intake valves and clean up the block a little. If you're interest in my intake valve cleaning video you can find that here:
https://www.youtube.com/watch?v=Kn6NVHLy-Xc
If you are interested in the oil cooler I purchased you can find that here (affiliate):
http://ebay.us/pdRL0d
If this is the first video you are catching of mine please consider subscribing. I upload regularly.
Thanks for watching :)
Видео Preparing My New BMW Engine To Go Back In! канала Vehicular DIY
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![I Changed My BMW Engine At Home!](https://i.ytimg.com/vi/8GTAwsLspws/default.jpg)
![1000HP BMW Engine build | 135i 335i l Part 1 | Subi-Performance](https://i.ytimg.com/vi/BvTuNxh7jgM/default.jpg)
![DIY: How to install a BIG TURBO on a BMW G20 M340i (Pure 800 Turbo on a B58 Step by Step guide)](https://i.ytimg.com/vi/R8YkTFuY9lY/default.jpg)
![E92 M3 Rod Bearing Replacement - What It Takes Start to Finish](https://i.ytimg.com/vi/gijJhMWg3RQ/default.jpg)
![Intake Valve Cleaning Without Any Special Tools N54 N55 DIY](https://i.ytimg.com/vi/Kn6NVHLy-Xc/default.jpg)
![Fixing a Blown Head Gasket ~ The Right Way](https://i.ytimg.com/vi/fhU_56cruIA/default.jpg)
![Come Look Inside A BMW Engine! Full Tear Down](https://i.ytimg.com/vi/_SxoGy5N2co/default.jpg)
![](https://i.ytimg.com/vi/Rf5nybNycg0/default.jpg)
![BMW 335i N54 Engine Build Bottom End](https://i.ytimg.com/vi/cWhPan3iozo/default.jpg)
![Possibly The Best Upgrade For Your BMW!](https://i.ytimg.com/vi/aFyGHMmYtVg/default.jpg)
![The Story Behind Luis' Wide Body PURE Stage 2 Turbo E90 335i - "Every Build Has A Story" Ep.3](https://i.ytimg.com/vi/OpLcZyEdRXk/default.jpg)
![I Manual Swapped My BMW! My E90 Has Never Been More Fun!](https://i.ytimg.com/vi/kAzIejuqMrA/default.jpg)
![The Dealer FAILED my "Unrepairable" BMW Supercar! Can I Fix it with this Simple DIY Trick???](https://i.ytimg.com/vi/6vOsU2J5MAo/default.jpg)
![I Gave My BMW M Handling With This!](https://i.ytimg.com/vi/Sqn9e-cB9fM/default.jpg)
![FULLY BUILT SINGLE TURBO N54 FIRST START! (BUILDING 1000WHP N54 Ep.3)](https://i.ytimg.com/vi/PNIq9dlb8uc/default.jpg)
![BMW N54 Valve Cover Gasket DIY](https://i.ytimg.com/vi/bJGvN9HNJuw/default.jpg)
![How Are My BMW Rod Bearings At 200K Miles? | N54 Rod Bearing DIY](https://i.ytimg.com/vi/L02y3Eb5xgM/default.jpg)
![I Made My BMW Run On Audi Ignition Coils | N54 DIY!](https://i.ytimg.com/vi/2v3y3hOHnpA/default.jpg)
![Why Did My BMW Engine Fail?](https://i.ytimg.com/vi/YD3Z7gW9n6k/default.jpg)
![[HOONIGAN] DT 111: Street Fighter LA 500hp BMW E92 vs Sh*tcar #SPACERACE](https://i.ytimg.com/vi/VRcAa6k-dzs/default.jpg)