Oppo A3 Pro 5G Temperature Error🌡Fix |Oppo Vivo Realme Temperature Error |Charging Error Solution ✅️

Oppo A3 Pro 5G Temperature Error🌡Fix |Oppo Vivo Realme Temperature Error |Charging Error Solution ✅️
Part 1
Oppo A3 Pro 5G Dead Solution | Mobile Repairing Course | Dead Phone Kaise Theek Kare
https://youtu.be/DQdJkG3bRtA⁠

Part 2
Oppo A3 Pro 5G Temperature Error Fix | All Mobile Battery Temperature Error Solution
https://youtu.be/WlntmlP89BU⁠

---

🔹 Fix Any Android Mobile Charging Temperature Error 🌡 – Step by Step Hardware Solution 🚨

Fix Any Android Mobile Charging Temperature Error – Oppo, Vivo, Realme & More! 100% Working Practical Solution.
---

1️⃣ Charging Temperature Fault Ka Reason

Android mobile me charging thermal error mostly battery thermal line (NTC / BSI line) ke wajah se aata hai.

Agar NTC sensor line open, short ya high resistance ho, to mobile charging error show karta hai.

Thermal line detect karna aur correct value measure karna zaruri hai fault fix ke liye.
---

2️⃣ Required Tools

Digital Multimeter (DMM) – Continuity & Resistance mode

Mobile schematic diagram (optional, but recommended)

Fine probes / needle probes

ESD-safe mat & tools
---

3️⃣ Step by Step Testing Process

Step 1 – Power Off the Device

Mobile ko OFF karo aur battery disconnect karo agar removable ho.

Safety ke liye live testing avoid karo.
Step 2 – Locate Thermal / NTC Line

Schematic diagram me dekho NTC / BSI line ka path.

Usually ye battery connector ke nearby PMIC ya charging IC tak jata hai.
Step 3 – Set Multimeter

Multimeter ko Resistance mode (Ω) me set karo.

Low-range select karo (1kΩ–100kΩ depending on sensor).
Step 4 – Test the Line

Multimeter probes se NTC line aur ground ko test karo.

Normal NTC reading temperature dependent hoti hai:

Room temperature (~25°C) → 10kΩ ± 5% common
Agar resistance infinite (open) ya 0 (short) → line faulty hai
Step 5 – Check Continuity

Multimeter continuity mode me line ko PMIC pin tak check karo.

Agar no beep / open circuit → thermal line disconnected somewhere
Step 6 – Fix the Fault

Open / short line → repair with thin wire bridge / PCB trace repair

Replace NTC sensor agar defective ho

Test again multimeter se before powering ON
Step 7 – Final Testing

Battery connect karo aur charging test karo

Ensure karo ki temperature error fix ho gaya hai
---

🔹 Video Highlights

Oppo A3 Pro 5G Temperature Error ka real reason

Battery Temperature Sensor (NTC Line) kaise check kare

Multimeter se fault finding

Sub board & charging section diagnosis

Permanent board level solution

Universal solution for Oppo, Vivo, Realme & all Android mobiles
---

🔹 Who This Video is For

Mobile Repairing

Technicians seeking practical board level repair skills

Anyone wanting 100% working charging temperature solution
---

📌 Model Covered

Oppo A3 Pro 5G
📌 Problem

Battery Temperature Error / Device Too Hot
📌 Solution Type

Practical Hardware Fix
---

📞 Call / WhatsApp for Course & Guidance: +91 96542 19510 (Himanshu Sir)

If this video helps, LIKE 👍 SHARE 📲 & SUBSCRIBE 🔔 for more practical mobile repairing tutorials!
---

🔹

#OppoA3Pro5G
#TemperatureError
#BatteryTemperatureError
#MobileRepairing
#MobileRepairingCourse
#HTLogic
#ChargingError
#HimanshuSir

Видео Oppo A3 Pro 5G Temperature Error🌡Fix |Oppo Vivo Realme Temperature Error |Charging Error Solution ✅️ канала HT LOGIC