HOW TO BUILD A OFF-ROAD MOWER PART 3
Part 3 I build my steering set up ~ tie rod, steer rod, spindles, steering stops. Your front end and steering needs to be a strong built system as its going to have to take a lot of abuse and if you want a reliable & capable rif your gunna wanna build your crap strong! Put some time into your builds!
Anyways I go over my 5 bolt hubs and how I weld them solid. And mount my 25” at tires on my 12” utility trailer rims mounted backwards!
Next I go over my custom dual exhaust, I will be building my own mufflers so stay tuned for how I do that!
I relocate my battery to my engine bay, on this model craftsman the battery is originally under the drivers seat, butt I like to use that area as a storage compartment, thus the relocation. Now if your doing this rememberer that your going to want to make sure that the steering gear set doesn’t come in contact with the battery and that you have a Sufficient heat guard from engine heat!
When removing your old wiring harness make sure trace out each wire so your know which ones to delete.
Stick around for PART 4 I’ll be showing you how to build your brakes and clutch system!
Видео HOW TO BUILD A OFF-ROAD MOWER PART 3 канала OKOFFROADMOWERS
Anyways I go over my 5 bolt hubs and how I weld them solid. And mount my 25” at tires on my 12” utility trailer rims mounted backwards!
Next I go over my custom dual exhaust, I will be building my own mufflers so stay tuned for how I do that!
I relocate my battery to my engine bay, on this model craftsman the battery is originally under the drivers seat, butt I like to use that area as a storage compartment, thus the relocation. Now if your doing this rememberer that your going to want to make sure that the steering gear set doesn’t come in contact with the battery and that you have a Sufficient heat guard from engine heat!
When removing your old wiring harness make sure trace out each wire so your know which ones to delete.
Stick around for PART 4 I’ll be showing you how to build your brakes and clutch system!
Видео HOW TO BUILD A OFF-ROAD MOWER PART 3 канала OKOFFROADMOWERS
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![HOW TO BUILD A OFF-ROAD MOWER PART 4](https://i.ytimg.com/vi/zqQTsWWBLkc/default.jpg)
![How to build an Off-road Mower](https://i.ytimg.com/vi/qe0ZQXnUGK8/default.jpg)
![How To Pick A "Good Mud Mower"](https://i.ytimg.com/vi/7A37MAF9nE8/default.jpg)
![How I Built The Mud Mower Wheel Horse](https://i.ytimg.com/vi/3BYl3ZcPw9s/default.jpg)
![Ford LT 3-link suspension off-road mower build! Part 3](https://i.ytimg.com/vi/WKqiqjo8wpA/default.jpg)
![WORLD's TOUGHEST LAWN MOWER RACE - King of the Trimmers 2021 | Deathwish EP24](https://i.ytimg.com/vi/N7exCllpfq0/default.jpg)
![Double the Speed for Super Cheap](https://i.ytimg.com/vi/3LlBEYWBdHk/default.jpg)
![Walk around off-road mower “MUSTY”](https://i.ytimg.com/vi/s3_-ty5UGOk/default.jpg)
![I Built the World's Worst Racing Lawnmower](https://i.ytimg.com/vi/tjYh4fA_dMw/default.jpg)
!["Not the Norm" Drivetrain Dual Transaxle](https://i.ytimg.com/vi/mNxTGmv0gvA/default.jpg)
![Super Easy Pulley Swap and Speed Checks](https://i.ytimg.com/vi/Kl-p3qVXyXk/default.jpg)
![How to build a off-road mower (scrappy build)](https://i.ytimg.com/vi/KhkVHSayqmQ/default.jpg)
![How to Build A Craftsman Mud Mower](https://i.ytimg.com/vi/yNmRxzT19-0/default.jpg)
![Full Suspension Mower Build - Pt 3 - Independent Front Suspension!](https://i.ytimg.com/vi/-R08UtWBdCg/default.jpg)
![Custom Off-road Mower Ripping](https://i.ytimg.com/vi/pL8hsaglFbM/default.jpg)
![Putting a Rear Lift on my Poulan - How to...](https://i.ytimg.com/vi/UG_knR7bhPA/default.jpg)
![HOW TO BUILD A OFF-ROAD MOWER PART 2](https://i.ytimg.com/vi/CEPfpQLRgDg/default.jpg)
![Mud Mower Mud Off](https://i.ytimg.com/vi/fzawq4p3_yg/default.jpg)
![Building a Free Murray Mud Mower](https://i.ytimg.com/vi/LPYISpswMsE/default.jpg)
![Ogemaw Hills mud mower ride with the boys](https://i.ytimg.com/vi/rg9sCvcTZ1M/default.jpg)