PiicoDev Pressure Sensor MS5637 | Raspberry Pi Guide

Let's use a PiicoDev Pressure Sensor to measure barometric pressure with a Raspberry Pi. Did you know you can also infer altitude from air-pressure? We'll modify the example to measure altitude, correcting for local weather conditions.

The full guide: https://core-electronics.com.au/tutorials/piicodev-pressure-sensor-ms5637-raspberry-pi-guide.html

If you have any questions about this content or want to share a project you're working on head over to our maker forum http://coreelec.io/forum

Core Electronics is located in the heart of Newcastle, Australia. We're powered by makers, for makers. Drop by if you are looking for:

• Raspberry Pi https://core-electronics.com.au/raspberry-pi.html
• Arduino https://core-electronics.com.au/arduino.html
• Sparkfun https://core-electronics.com.au/brands/sparkfun-australia
• Adafruit https://core-electronics.com.au/brands/adafruit-australia
• Pololu https://core-electronics.com.au/brands/pololu-australia
• DFRobot https://core-electronics.com.au/brands/dfrobot-australia

The following trademarks are owned by Core Electronics Pty Ltd:

"Core Electronics" and the Core Electronics logo
"PiicoDev" and the PiicoDev logo
"GlowBit" and the GlowBit logo

Видео PiicoDev Pressure Sensor MS5637 | Raspberry Pi Guide канала Core Electronics