Artillery Hornet - 3D Printer - Unboxing, Review & Setup

Hey, Guys today in this video I am going to review Artillery Hornet 3D Printer.

Specifications:
Build Volume: 220*220*250mm
Layer Resolution: 0.1mm-0.32mm
Build Speed: 60-100mm/s
Travel Speed: 200mm/s
Calibration: Manual
Nozzle Temperature: 180°C-240°C
Nozzle Heating Time: 3min
Control Board: Artillery 32bit Mainboard
Support Ultra Quiet Printing In House developed 32Bit Mainboard

Buying Link:
[artillery3d] https://bit.ly/3l4VXlo
[Amazon US] https://amzn.to/3ttqMEj

Hornet is a Budget 3D printer with some minimal Features:
1. It is bumming on Marlin Firmware which is really great.
2. Hornet is using In House developed 32Bit Mainboard.
3. [EASY TO ASSEMBLE AND USE]: This printer is 95% pre-assembled with an integrated structure and mental frame. It will only take you 3 minutes to set it up. Also, it is easy to use because you can operate this printer only with a one-key knob integrated switch. If you are a beginner, this printer is definitely right for you.
4. [CLASSIC AND FASHIONABLE APPEARANCE]: Unlike many 3D printers out there with a plain design, Artillery Hornet is a very attractive one. The design of the sporty-looking was inspired by the high-end sports car. You can feel the charm of science and technology by looking at its classic and fashionable appearance.
5. [NO CABLE DANGLING AND SAFE TO USE]: The innovative “Integrated cabling” with patent-pending combines all power and signal cables and filament feeding in one cable. It will not only ensure you be free from cable dangling but also make the printer look neat. Besides, several fans being set for parts cooling during printing make users be free from overheating trouble.
6. [STABLE AND PRECISE PRINTING]: The reverse single Z-axis with a patented Z-coupler can make sure every printing is smooth and avoid layering problems. New Titan Extruder with strong extrusion and Modular Hotend with fast-melting and heating helps filament feeding more stable and printing be more precise. The adjustable filament holder can keep the printer's center of gravity low and minimizes wobble during printing.
7. [SILENT PRINTING]: Self-developed 32-bit motherboard with replaceable drivers can bring ultra-silent printing and better performance. You can even sleep well while the printer is working in your room.

TimeStraps:
00:00 Intro
00:16 Unboxing
01:20 All things inside the Box
01:51 Printer Assembly
04:34 Powering Printer First time
04:45 Bed Leveling Issue I faced
05:28 Replacing Stepper Driver
06:01 Artillery Sent Replacement Parts
08:06 Found the Real issue
09:06 Testing the Printer
11:27 Most useful 3d printed tool
13:22 Some B-Roll
#artillery
#Hornet
#PrinterReview

Artillery Hornet 3D Printer
Artillery Hornet - 3D Printer - Unbox & Setup

Видео Artillery Hornet - 3D Printer - Unboxing, Review & Setup канала Creative creator